Cd Changer Wiring Help
Hi all,
Hope some of you audio experts can help me out with this query. I have an alpine (XQE 105560) changer & i want to cut off the multiplug then re-connect it to a wiring loom (audi-vw) that in turn runs via a blue iso plug into the back of my audi navigation plus radio/sat nav unit that i have previously installed into my 75.. What i need is help as to what the 8 wires coming out of the alpine unit correspond too, ie live, earth, speakers & control wire etc... I've tried searching the forum for the info, but my head is swimming with all the different units & wire info that i read.. (im old:shrug:)... Please make an old guy happy & get his cd changer up & running again..:D Many thanks ferryjambo |
Anyone Please ??..:)
|
The blue plug (mini Iso) that goes to the changer is numbered
pin number 14 is right front + pin number 17 is right front - pin number 19 is K bus connection pin number 13 left front + pin number 16 left front - pin number 15 neg pin number 7 pos It is here with the colours as well :) http://www.the75andztclub.co.uk/foru...92&postcount=1 HTH |
|
thanks, unfortunately the wire colours in the quide don't correspond with the wires on the plug end alpine cd changer ?? :shrug:
i have White. black. yellow. brown. red. green. blue/ with what looks like silver earth wire coming out of the cd changer cable going into it, i suppose this is the player earth ??, then a darker blue/violet coloured wire. I need to know what these wires mean as in live, earth, control & the speaker wires, then i can splice them onto the cable with the blue iso plug that run out of the sat nav down to the glovebox changer..:confused: I know what the wires on the blue iso socket are, but the 8 wires on the alpine are the problem..:) thanks again though for the help, any ideas/ suggestions would great great on the alpine wires.. thanks ferryjambo :) |
Cdc Xqe105560
Alpine CDC XQE105560 wire colors:
pin1 Audio Right+ = red pin2 Audio Right- = green pin5 I(K)bus = brown pin6 Audio Left+ = white pin7 Audio Left- = blue pin8 Ground = black pin10 +12V = yellow Hans |
Thanks
thanks everyone,
i tried splicing the wires using hans instructions, the unit powers up & cycles the cd's ok, but my screens says "No Cd changer"... I was carefull to connect the kbus/control wires correctly between the changer & sat nav but it does'nt see/speak to it ??:shrug:.. Here's my unit.. http://i115.photobucket.com/albums/n...lus2_8pjpg.jpg and the back showing the wiring diagram.. http://i115.photobucket.com/albums/n...lus_pinjpg.jpg http://i115.photobucket.com/albums/n...ingdiagram.gif as you can see from the 3rd image i thought pin 17 (control) on the blue iso plug was the kbus.. I think i should have connected the kbus wire from the alpine onto the Nos.3 pin of the bottom iso marked ( K. Line ).. I'll try this tomorrow & see if this enables the changer & sat nav unit to "talk" to each other...:) |
I would think that would be the only option :)
Are you sure the changer is in working order :shrug: good luck |
Quote:
If this does'nt work, then it's a cheap vw,audi,skoda,seat cd changer off fleabay that is a simple plug & play i've been told also, but as the alpine unit was here gathering dust i thought i'd have a go getting it up & running again saving me some cash too..:lol: I'll try the kbus wiring fix & see if that cures the sat nav unit not seeing the cd changer.. thanks again for your input, it's good to know fellow 75 owners can offer advice & tips to people in need like me too:bowdown: thanks ferryjambo :) |
slightly different angle, is the Audi unit a good fit in the dash, and what fuctionality does it have...
|
All times are GMT. The time now is 05:57. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd