Wheel Arch Liner Scrivets
I want to fit new Scrivets when refitting my wheel arch liner.
These look right except I dont really want a hundred but they are cheap and I will have enough for years.....and years. :D https://www.ebay.co.uk/itm/303871855...Bk9SR_ickbDSYQ Do you know of an alternative in smaller quantities. If not I'll get the hundred Rimmers are £1.26 each Part Number DBP5563 https://rimmerbros.com/Item--i-GRID001808 macafee2 |
I found a stand full of various sizes in a shop, but they are produced by
www.connect-consumables.co.uk Search on there from serial number 36501 onwards and you will find suitable sizes but don't be put off by the make names. They came in packs of ten. |
although a wee bit more money i would think this set more versatile .? and a lot more clips .. :D
I did get a box of 660 various .. but cannot find the link i put on here. https://www.ebay.co.uk/itm/404137933...Bk9SR_CghbXSYQ C |
I want to thank you guys aswell as i need to refit all of my liners and I don't have any fixings
|
decided to order the hundred in the end.
macfee2 |
There are two push rivet sizes for the front wheel arch liners.
There's one size (diameter) at the six or so locations you can see under the wheel arch and a couple of larger diameter ones attaching it to the underside of the subframe. I got both sizes in packs of twenty or so from eBay, bit It was a while ago. TC |
Quote:
thanks again macafee2 |
Quote:
https://i.imgur.com/2R5Wi1yl.jpg1 |
Hi
I'm just looking to get some of these too, but seem to be missing all but two mangled ones of mine in the front wheel arch liners... Was the decision from the above that we need both 8mm and 10mm scrivets for the liners? Thanks All |
Quote:
|
All times are GMT. The time now is 04:45. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd