If the clip on your rear Interior light has broken there's no need to buy a new one, you can re-use the original one. You can adapt a steel corner bracket, cut it off, bend it and fasten it with a screw. About 30 minutes work. Then you can easily replace the unit. Never breaks off again. The original clips will eventually break off again. You can also buy a new one on aliexpress.
I will post a picture of how I did mine. https://www.the75andztclub.co.uk/for...2520d94428.jpg open the plastic cover https://www.the75andztclub.co.uk/for...252324c0b2.jpg create a hook from the metal bracket and drill a extra whole in it where you can put a screw to hold it. https://www.the75andztclub.co.uk/for...25232a1051.jpg drill a tiny screw hole in the plastic to ensure it will not crack while using the screw https://www.the75andztclub.co.uk/for...25232e4b6d.jpg et voila, no plastic clips needed anymore. You can adapt the corner of the metal using two pliers. For extra security you can use extra self-adhesive tape between the metal and plastic. |
All times are GMT. The time now is 11:03. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd