The 75 and ZT Owners Club Forums
Page 2 of 2 1 2
Show 150 post(s) from this thread on one page

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)
-   The 75 and ZT Owners Club General Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=9)
-   -   Fitting a Premium Bumper to a ZT MK1 (https://www.the75andztclub.co.uk/forum/showthread.php?t=264041)

RoverRobson 20th March 2017 19:59
Quote:
Originally Posted by Rick-sta (Post 2464286)
I have put a lip splitter on mine, but it does make the bottom of the bumper tight and pulls it down a bit when trying to fit it to the undertray.

does anyone know if the foam pads behind the bumper were different on a premium bumper from a standard one, as I had to shave ours down a bit because the foam kept pushing the bumper out and preventing it from fitting properly. Was tempted to not bother fitting the foam inserts at all.


I took my foam out and it made no difference :(

T-Cut 20th March 2017 20:18
Quote:
Originally Posted by Rick-sta (Post 2464286)
Does anyone know if the foam pads behind the bumper were different on a premium bumper from a standard one
According to Part Numbers, every bumper for 75, ZT, Mk1, Mk2, single horn, twin horn and premium are all different.

TC

Christopher Price 20th March 2017 20:45
As the MK 1 ZT is the best looking derivative of the lot, why would you want to fit an ugly Audi grille to it?

jonc3725 20th March 2017 20:54
Quote:
Originally Posted by Christopher Price (Post 2464408)
As the MK 1 ZT is the best looking derivative of the lot, why would you want to fit an ugly Audi grille to it?
:D:D:D:D:D:D:D:D:D:D:D Oh soooo true:getmecoat::drool4:

Astraeus 21st March 2017 06:19
Not
 
It is not an Audi bumper though is it? Audis have a copy of our bumper...:shrug:

Chris

marinabrian 21st March 2017 06:27
The genuine MGR V8 splitter is different in respect to items such as the SEAT Cupra one, the genuine part extends the bottom of the bumper to the point where it cannot be fitted using standard wheelarch liners.

So this is directed at Robson, remove the splitter and try again, I had this issue less than a month ago ;)

Brian :D

RoverRobson 21st March 2017 06:31
Quote:
Originally Posted by Christopher Price (Post 2464408)
As the MK 1 ZT is the best looking derivative of the lot, why would you want to fit an ugly Audi grille to it?


Why not... don't see your problem...


All times are GMT. The time now is 05:34.
Page 2 of 2 1 2
Show 150 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd