The 75 and ZT Owners Club Forums

The 75 and ZT Owners Club Forums (https://www.the75andztclub.co.uk/forum/index.php)

- Technical Help Forum (https://www.the75andztclub.co.uk/forum/forumdisplay.php?f=11)

- - MGZT 1.8 Turbo (https://www.the75andztclub.co.uk/forum/showthread.php?t=248151)

cjinstructor

29th June 2016 21:15

MGZT 1.8 Turbo

1 Attachment(s)

Can anyone tell me where this vacuum pipe should connect to from the fuel pressure regulator ?

suzublu

2nd July 2016 16:05

Moved to Technical Help for better coverage:}

Sector-9

2nd July 2016 16:58

Not sure about this engine specifically, but the vacuum connection from the fuel pressure regulator usually goes to the inlet manifold to vary fuel pressure according to engine load.

T-Cut

2nd July 2016 18:14

The single pipe from the Y-splitter goes to the turbocharger.

http://i5.photobucket.com/albums/y19...pse1dab459.jpg

It goes here -

http://i5.photobucket.com/albums/y19...ps2pw0evyh.jpg

TC

zedhed

5th July 2016 07:04

Ah,this seems to have answered my question as well. Looks like I have the pipe splitter missing.

T-Cut

5th July 2016 08:47

Quote:

Originally Posted by zedhed (Post 2324559)

Looks like I have the pipe splitter missing.

But I see it in your photo.(??)

TC

cjinstructor

5th July 2016 17:51

Thank you guys and for the pics T-Cut, car so very nearly completed now. It was a 1.8 NA, decided to put in a turbo engine.......so did it the hard way and got bits from everywhere.....bit like a jigsaw ! :)

T-Cut

5th July 2016 18:42

Quote:

Originally Posted by cjinstructor (Post 2324895)

decided to put in a turbo engine.......so did it the hard way and got bits from everywhere.....bit like a jigsaw ! :)

Did you change the electronics too?

TC

All times are GMT. The time now is 00:13.