bump,
any help at all, this thing is driving me nuts! |
Quote:
|
Check the wiring going into the inertia switch!. Easiest way is to remove the glovebox to get right into the wiring (4 torx screws at top, 3 hidden under mat in glovebox). Press the rubber button on top and you should feel a small straight gap, thats where the switch would pop up!. Now make sure the wiring connector is TIGHT.
I had the same symptoms and this was the culprit.....like you say, drives you nuts! |
All times are GMT. The time now is 06:24. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd