Reversing lights and...............
 

............beeper have stopped working on Banana. Could it be the switch? Is it an easy fix? Or do I need an expert to look for me?
Sometimes when selecting reverse the beeper sounds but not all the time.

Many thanks in advance for advice.

Switch sounds likely, as it supplies power to the reversing lights and sensors also – it’s a known failure point.

Very cheap on eBay, and not too hard to fit – bit of a fiddle, but I managed it. It’s in the front of the n/s wheel arch.

Could be the 15amp fuse.

Rev

Yes, I should have thought of that too :duh:

Link below for changing the switch

Think it is a loose connection as it works sometimes. But thanks for the link to the "how to's".
Will have a look.

Could be, but my switch failed gradually too...

Not the switch itself but the rod ;i repaired mine like this:

http://rovermg1.free.fr/rovermg/thum...ROtI2aCS0M.jpg

Mike

Located the switch but think it will have to be replaced. The wiring appears to be loose. But until I can find somewhere secure to jack it up it will have to wait. Living on a main road is no help.