Car in gear but not moving
Hello everybody, so yesterday this thing happened, I was just driving around in the city, shifted in 2nd gear, and just normally left the foot off the clutch pedal, drove in second gear for like 10-20 yards and then suddenly, heard some kind of a weird sound, the shifting knob stayed in 2nd gear, but all of a sudden the car wasn't accelerating anymore, still tried to push the acceleration pedal, but it was just going up in RPM's with no acceleration, just like I would've accelerated in neutral gear, tried shifting to 1st gear to get it going, it kinda struggled for one more last push and moved maybe some couple inches, and then the same happened. I checked beneath the car for any planetary gear issues, but that doesn't seem to be the issue, I might be thinking it is either the clutch or the pinion gear? Anyone thinking of another possibilities?
|
If you haven't snapped a driveshaft, or got a fault with the gear selector cables, then I'm afraid it is a gearbox off job to find the cause.
Could be a broken clutch plate, DMF, or a fault with the gearbox itself - although that would be rare as they are usually very reliable. If I was putting any money on it I'd bet the centre has sheared off from the clutch plate. |
I didn't quite get that, what do you mean about the centre sheared off from the clutch plate?
|
And also, if that would be the case, could you please send me a link in PM with a reliable replacement part(s), because my workshops here have very high prices parts wisely...
|
Quote:
http://rovermg1.free.fr/rovermg/thum...BlMTrb4VbD.jpg Parts possible source https://www.dmgrs.co.uk/collections/...smission-parts Mike |
Quote:
Quote:
I'm sure someone can provide you with a source for reasonably priced good quality clutch components. Change the complete clutch and the slave cylinder while you are in there, and check the DMF play is within the limits - there is a guide on the forum if you do a search. |
|
Driveshaft popped out?
If not, I'd put my money on DMF failure. Only removal of the gearbox will reveal all. |
As far as I could've seen, I mean yeah it was dark and I could only take a peak with my flashlight (I was waiting for the towing truck to arrive), the driveshaft didn't seem to be the issue, shfited in 1st gear got out of the car but no wiggles underneath the car, no movement at all from the driveshaft, I am still waiting for a call from my local service, the car has still been in there for the last 2 days but they're quite congestioned now and only monday they're going to start looking into it. Thank you all guys for your info on this, helps a lot! :bowdown:
EDIT: And btw, I replaced the slave cylinder like 2 weeks ago, forgot to mention about it, because of having no pedal at all, and I can know 100% sure that the labour work was done 100% flawless, there's 2 guys in there that are just topline pros and they take extra care for details too (I've finished a lot of special projects with them for another 2 cars of mine and that's why I'm saying it, one of them dissembled a whole Jeep Wrangler YJ of mine piece by piece and installed almost every new part back to it's place with mods needed to be done for everything to work, it was an offroad jeep project). Now we'll see. I tend to think that maybe I couldn't see nothing because something was broken from inside the transmission, could be that too. |
Quote:
driveshaft not pushed fully home http://www.rimmerbros.co.uk/Item--i-GRID001540 Mike |
All times are GMT. The time now is 16:53. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd