Quote:
Originally Posted by STUBIE
Dave how did you get the wires out to refit into pin 2 and 3 of the the grey ISO connector?
|
The two wires blue/orange and blue/purple will have to be cut as the pins in the green mini ISO are smaller than the ones in the grey ISO..
In the grey ISO plug there are usually wires connected to pins 1,2,3. these are not used in the Symphony install, 1 is cut [not needed as its phone mute]
2 and 3 should be cut leaving a shot length of wire attached to the pins.
Then the short bits of wire are joined to the blue/orange and the blue/purple.
If you have no pins in 2 and 3 you will have to purchase them.
I will have to look up where you can buy them.
Dave T