Quote:
Originally Posted by steve-45
Whilst changing a rear wheel I noticed a couple of surface rust spots on the metal that the liner does not cover.... another job for the list !!
Looking at the liner it only seems to be held on with 4 or 5 retaining nuts, are they metal or nylon and will they undo ?
Also, after I've wire brushed all the surface rust off whats the recommended paint / rust killer to use?
I intend to put underseal over the paint to help protect it from further damage.
|
See posts 18 and 24 here. I used POR15 paint
https://www.the75andztclub.co.uk/for...d.php?t=227289
Then dinitrol underbody wax over the lot.
The little nuts could be rusted on and the post may snap when you remove them, but worst case you can carefully drill a hole in the stud plate and refit them with a small bolt as I did.