The 75 and ZT Owners Club Forums - View Single Post

Matt_75 · 2nd March 2024, 19:10

Hi Martin,

You can use TOAF to "pair" a new or used PCB with your BCU, this will get remote locking/unlocking working. Here's some instructions: https://the75andztclub.co.uk/forum/s...62&postcount=2

You'll need to use the old version of TOAF though (version 0.5.00.43). Be sure to make a back-up of the module before making any changes, just in case something goes wrong.

The transponder chip and EWS (immobiliser) are a separate entity though. For that, you'll either need T4 (I assume it can do this, never used it myself) or something like an EWS Editor Lite. This needs to be a brand new chip, you can't reuse an old one.

2nd March 2024, 19:10	#2
Matt_75 Gets stuck in 75 Saloon Join Date: Apr 2022 Location: North Somerset Posts: 575 Thanks: 13 Thanked 20 Times in 8 Posts	Hi Martin, You can use TOAF to "pair" a new or used PCB with your BCU, this will get remote locking/unlocking working. Here's some instructions: https://the75andztclub.co.uk/forum/s...62&postcount=2 You'll need to use the old version of TOAF though (version 0.5.00.43). Be sure to make a back-up of the module before making any changes, just in case something goes wrong. The transponder chip and EWS (immobiliser) are a separate entity though. For that, you'll either need T4 (I assume it can do this, never used it myself) or something like an EWS Editor Lite. This needs to be a brand new chip, you can't reuse an old one. __________________ Matt 2001 Rover 75 Connoisseur SE 2.5 (BRG) 1999 Rover 75 Club 2.5 (Dorchester Red) 1973 Triumph Dolomite (Honeysuckle) Last edited by Matt_75; 2nd March 2024 at 21:19..