I removed the ABS connector and noticed a small amount of water in the connector. I can’t see where it may be coming from. Any suggestions? I also noticed some blue / green mould on a pin that I looked up to be the rear right ABS sensor. I blew out the water with an air line, cleaned the plug and socket with spray contact cleaner and scraped the mould off the pin. Having put back together, I no longer get an ABS Sensor code but still get the ABS fault so maybe the pump has been damaged. I’ve ordered a pump which will hopefully cure the problem. I hope it doesn’t continue to get wet as I don’t know where the water is coming from.
|