The 75 and ZT Owners Club Forums - View Single Post

SD1too · 25th June 2016, 08:28

Hi Rod,

I think you mean the rubber upper mountings from radiator to bonnet locking platform, yes? If so, they are indeed a push-fit. If you look underneath the locking platform you'll see a bulb of rubber which passes through a smaller hole in the platform. I can't remember now whether it's easier to release the rubber mounting here or from the top of the radiator. Either way, they'll be tight and you will need the assistance of a lubricant and a blunt tool to push the rubber bulb through its mounting hole.

I hope that makes sense?

Simon

25th June 2016, 08:28	#16
SD1too Doesn't do things by halves Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007 Location: Former Middlesex Posts: 20,386 Thanks: 1,587 Thanked 3,749 Times in 3,181 Posts	Hi Rod, I think you mean the rubber upper mountings from radiator to bonnet locking platform, yes? If so, they are indeed a push-fit. If you look underneath the locking platform you'll see a bulb of rubber which passes through a smaller hole in the platform. I can't remember now whether it's easier to release the rubber mounting here or from the top of the radiator. Either way, they'll be tight and you will need the assistance of a lubricant and a blunt tool to push the rubber bulb through its mounting hole. I hope that makes sense? Simon __________________ "Whatever is rightly done, however humble, is noble." Sir Henry Royce.