[FrenchMike]

Hi,John

If you can lead some electric measurements;
there are two important informations.

1 Low pressure fuel sensor (fuel filter housing):
for 2.6 bars,you must have about 4 volts on the yellow/blue wire

(sensor disconnected,engine can start)


2 Fuel rail pressure sensor(at the end of the fuel rail)
(blue/black wire)
you have:1.3 volts at idle and 2 volts at 3000 rpm.

(sensor disconnected,one can start the engine too)


And don't forget ;during cranking,the tachometer move slighty
(Showing crankshaft sensor is OK)

Mike