Quote:
Originally Posted by marinabrian
Pop the tab lighter door down, and you can flick the switch panel covers off with your finger
I normally use a gash five hole switch fascia, clamped face to face with a one I'm cutting holes into to mark the aperture with a scribe.
Then you simply chain drill out the hole you want and finish off with a file
Brian
|
Cheers Brian, but I was also hoping to remove the swith holder behind that panel as the usb one I'm putting in fits snuggly into that slot, so the panel would need to be open to that, hence the template. So is that part of the ashtray or can it be removed likebana the panel?
__________________
This is my Rover, there are many like it, but this one is mine
Born; Wednesday, 3rd October 2001 @ 16:00:16
The 34,336th 75 to run off the production line of 112,381
This was the 4,730th 75 CDT Connoisseur to be made out of 10,898
This was the 2,647th 75 in White Gold Metallic (code: GMN) to be made out of 12,251 White Gold Metallic 75s
To do
MK2 dials with IPK, FBH repair, headlining repair (again!) and some cosmetics.
|