Quote:
Originally Posted by wnj516
Ratty, Well done the pic shows your enthusiasm, your the first I know who has done it that way, so you have removed the complete valve and replaced it. having not seen the valve myself is it similar to the one in the plenum or have you a picture of the faulty one.
|
Here is my leaking valve controller. It would appear to be a case of the antifreeze mixed at a ratio of 50:50 is destroying these valves, as well as causing a whole host of other problems. OAT anti-freeze should be between 25 and 30% mix, rather than MGR's 50% recommendation. In short: 50% is way too strong.
Here is a link to the discussion, you'll need to be a full member to view it.
http://www9.mg-cars.org.uk/mgoc260/f...chnical-Corner