The 75 and ZT Owners Club Forums - View Single Post - Replacement stereo & routing cables behind dash?

Kennyeth · 28th December 2016, 07:30

[QUOTE=Rob T;2422504]Thanks Chris.

So if you take the A-pillar off, can you pop cables up from under the dashboard in that corner? Or do you need to loosen / remove anything else?

To get cables from the A pillar to behind the dash I use the tip I got from Nigel (ennine)
remove the or pull forward the IPK and use a wire coat hanger or other stiff wire with a hook on one end and then pull any cables through.
Pulling the IPK forward made that a lot easier for me.
I would also plug any cables into the unit and store the coiled up length in the A pillar for items you intend to fit later Cameras Etc) saves pulling the unit out again.
Ken.

28th December 2016, 07:30	#5
Kennyeth This is my second home No more Rover Join Date: Apr 2009 Location: Barnsley, South Yorkshire. Posts: 5,881 Thanks: 1,625 Thanked 1,308 Times in 998 Posts	[QUOTE=Rob T;2422504]Thanks Chris. So if you take the A-pillar off, can you pop cables up from under the dashboard in that corner? Or do you need to loosen / remove anything else? To get cables from the A pillar to behind the dash I use the tip I got from Nigel (ennine) remove the or pull forward the IPK and use a wire coat hanger or other stiff wire with a hook on one end and then pull any cables through. Pulling the IPK forward made that a lot easier for me. I would also plug any cables into the unit and store the coiled up length in the A pillar for items you intend to fit later Cameras Etc) saves pulling the unit out again. Ken.