[jonc3725]

Ok a bit of an update after this evenings working on the car.

Firstly the reverse Sensors are now working

After removing the parcel shelf the wiring loom was there for the buzzer and the rear blind.

blind connection



and Buzzer connection



Removing a foam blank found the correct hole for the push connection for the buzzer mounting and 20 second later the buzzer was fitted





Tested the car by reversing towards the Supra and low and behold it worked perfectly but blimey is it loud without the parcel shelf in place

The next job was to clean out the back of the car. When I removed the seats (I used this way to release the seat back https://uk.video.search.yahoo.com/vi...chr-yo_gc&tt=b) I was met with 14 yyears of crud



I disconnected the seat belts and removed the trim panels and gave everything a really hard clean down. Boy the colour of the water when I finished was gipping but the end result was pleasing.



I have also washed down the foam insulation and it is now in the man cave drying out.

I had one job to do to finish the back of the car off but couldn't do it at the weekend because the bits had not arrived.

both bits arrived today in the post and were fitted



Yep fitted new boot and MG badges to finish off the back