Your bonnet not closing may be due to dirt in the catches on the slam panel not closing properly ie, there are little half moon shaped latches which hold the bonnet pins, these may be stuck inside the catches, and need releasing and cleaning. Easiest way is to remove the bumper and slam panel giving access to the release catches. Also, the 2 bolts either side of the slam panel holes may need a little loosening to allow the half moon catch to move. Hope this helps that bit.
Just to add, if you can't see the half moon catch, tap the slam panel with a hammer near the hole in the catch, it should pop out
Sent from my SM-A145R using Tapatalk
Last edited by suzublu; 14th April 2024 at 15:57..
|