Quote:
Originally Posted by FrenchMike
John,
Concerning the the rail sensor,it seems correct but 5.68 volt for the low pressure ,it is just impossible because it is supplied with a 5 volts from the ECM
(black/purple wire)
|
Sorry Mike, I'm getting a little confused.
I checked the voltage on the
yellow/blue wire on the fuel filter housing and got the 5.68 volts, I've checked it again and still get the same reading.
The other readings (1.28V & 2.12V) were taken from the blue/black wire at the end of the fuel rail.
Auto electrics have never been my strong point.
-John.