The wire was in the loom with the ISO's at the end of it, I have it going into pin2 on the 6 pin connector on the SAT NAV loom is this right? should it be in pin 1?
This connector only has 2 wires in pin 1 and 2.
As stated the original loom had what looks like the steering wheel remote wires going into it, but these I have hard wired directly to pin 10 and pin 17 as directed by one of Duotone pages, Steering wheel control works Ok.
The symptom is using the status I get about 4 -6 satellites but nothing on the wheel sensor.
Stubs
|