The 75 and ZT Owners Club Forums - View Single Post

stocktake · 6th February 2011, 16:53

Definative way is to fill it via the vacuum method but unless you have a pela pump or similar you wont be able to do that.

Another way is to unbolt the exp vessel and hold it as high as you can the bleed screw on the KV6 is under the air intake on the pass side, remove the air box top and rubber hose connected to the throttle body and it is built into one of the large hoses revealed below. bit of an ongoing process really, make sure the heater is on etc.

What has caused you to need to refill the system?

6th February 2011, 16:53	#3
stocktake Vis Whiz Rover 75 2.5 auto Saloon Join Date: Jun 2007 Location: LEEDS Posts: 20,591 Thanks: 2,057 Thanked 3,056 Times in 1,621 Posts	Definative way is to fill it via the vacuum method but unless you have a pela pump or similar you wont be able to do that. Another way is to unbolt the exp vessel and hold it as high as you can the bleed screw on the KV6 is under the air intake on the pass side, remove the air box top and rubber hose connected to the throttle body and it is built into one of the large hoses revealed below. bit of an ongoing process really, make sure the heater is on etc. What has caused you to need to refill the system? __________________ Dave... Lost a few stones and a Gall Bladder and part of a bile duct and all of my dignity in the suppository incident