Quote:
Originally Posted by Gino
Sadly that is a bit beyond me Hopefully someone more knowledgeable will reply with further details.
Good luck,
Rob
|
I was having trouble with airbag light for years especially if drivers seat had been moved. Eventually wiggling it didn,t work. After leaving ignition off for a few hours, I cut through the wires at both ends of the yellow connector. Removed the connector and replaced it with a couple of those plastic block connectors with the screws in that clamp the wires inside. I,ve had no trouble with it since, it only comes on when it should, when you turn the ignition on and then go out. An extra precaution would be to disconnect the battery before you cut the wires but luckily I got away without the airbags going off.
Sent from my SM-J320FN using Tapatalk