[Canonite]

Originally Posted by captaintess

Just for the record, the cam shafts are NOT inter changeable, the inlet camshaft cannot be used for the exhaust camshaft! the lobes are different, if the end of the camshaft has broken the more likely the woodruft key on the pulley has perished or the timing belt has stretched, the best way round this is the replace the camshaft, pulley and the woodruft key and don't forget to replace the pulley bolts fitting them with thread locking chemical ! i've done three of these engines and they are a total nightmare! normally charge about £700. Or buy a second hand engine!

This thread was done and dusted back in 2010 mate.