The 75 and ZT Owners Club Forums - View Single Post

wuzerk · 13th December 2010, 09:22

Right cracked it! I blocked up the unnecessary hole with a 2 part epoxy putty,from Bid TV, but you could also use Milliput epoxy if available. The result was very encouraging.
With housing upright with 1 1/2" end uppermost the time taken for it to drain through after being filled with water was less than 10 seconds with the hole and more than 2 1/2 minutes with it plugged

MINTEE I said I am not impressed with the thermostat not the housing.

13th December 2010, 09:22	#513
wuzerk Passed Away Rover 75 CDT 03 auto Conn. SE Join Date: May 2009 Location: London Posts: 2,885 Thanks: 104 Thanked 254 Times in 204 Posts	Housing Right cracked it! I blocked up the unnecessary hole with a 2 part epoxy putty,from Bid TV, but you could also use Milliput epoxy if available. The result was very encouraging. With housing upright with 1 1/2" end uppermost the time taken for it to drain through after being filled with water was less than 10 seconds with the hole and more than 2 1/2 minutes with it plugged MINTEE I said I am not impressed with the thermostat not the housing. Last edited by wuzerk; 13th December 2010 at 09:48..