View Single Post
Old 2nd February 2010, 17:15   #13
SD1too
Doesn't do things by halves
 
SD1too's Avatar
 
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model.

Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,382
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
Default

Quote:
Originally Posted by upstream View Post
... although I had cleaned the old contacts thoroughly what I hadn't noticed was the deep tracks that had been worn into them over time. I think this must have been the issue because after popping the starter back in, reconnecting the battery etc and turning the key - the car fired into life beautifully!
Pleased to hear that Andy! Thanks for letting us know. Told you that you wouldn't need a new starter motor.

Quote:
Originally Posted by upstream View Post
I'm over the moon at the moment and ready to start on the next thing (3 speed fan replacement).
You don't have to replace it. You can fit new brushes at very little cost. Should be a piece of cake for a solenoid repair man!

Quote:
Originally Posted by upstream View Post
how do I sign up as an official member?
Click on "subscribe" in the top right hand corner of this page.

Quote:
Originally Posted by upstream View Post
I noticed that the car idles at around 800 rpm. Is this about right?
Yes, and only the ECU can adjust it.

Welcome to the wonderful world of successful 75/ZT maintenance.

Simon.
__________________
"Whatever is rightly done, however humble, is noble."
Sir Henry Royce.
SD1too is offline   Reply With Quote