|
||
|
|
1st June 2012, 13:31 | #1 |
Avid contributor
75 Club SE-T 1.8 T Join Date: Jun 2011
Location: Plymouth
Posts: 190
Thanks: 0
Thanked 0 Times in 0 Posts
|
size of nyloc on handbrake
thinking ahead if i get a chance to change my handbrake compensator this weekend what size is the nyloc nut on the cable to adjust it ,as it is fully tightend up there fore may have to cut it off having a new one ready just in case might be a good idea many thanks
Sean |
1st June 2012, 13:40 | #2 |
This is my second home
MG ZT 190+ Join Date: Jul 2011
Location: Skelmersdale, Lancs
Posts: 3,027
Thanks: 163
Thanked 161 Times in 122 Posts
|
You may get away with just changing it. I believe you need a 13mm socket to remove it but i'm not sure on the size of the nut itself.
__________________
"You don't park a ZT, you simply allow it to rest until next time." It may not happen very often but if I say something helpful please hit the "thanks" button as it helps other users. Thank you. No. 16 of only 52 Nocturne Blue 75/ZT ever produced. ONLY TEN of these were ZT 190+ http://badges.fuelly.com/images/sig-uk/263467.png |
1st June 2012, 14:01 | #3 |
Retired
rover 75 v6 Auto Conn. SE 54 plate LPG and 2006 Rover 75 v6 Auto LPG , 1.8 r75 Manual Join Date: Aug 2010
Location: London
Posts: 3,379
Thanks: 0
Thanked 6 Times in 6 Posts
|
I think the thread size is M8
|
1st June 2012, 18:47 | #4 |
This is my second home
Transit Connect Join Date: Feb 2011
Location: Crewe
Posts: 9,532
Thanks: 868
Thanked 1,619 Times in 1,095 Posts
|
you will need a 13mm deep socket
|
1st June 2012, 20:09 | #5 |
This is my second home
75 Contemporary SE Mk II 2004 Man. Sal. CDTi 135ps, FBH on red diesel, WinCE6 DD Join Date: May 2010
Location: Leeds
Posts: 17,273
Thanks: 2,160
Thanked 2,061 Times in 1,586 Posts
|
M8 which needs a 13mm long socket. If it has been wound all the way down, a long socket may not have the reach - in which case shape a bit of tube to fit.
The thread on the cable end, is harder than the nut, so if it has been overtighted the nut's thread strips making it impossible to remove. In which case - drill down the side of the nut with a 2mm drill bit to free it.
__________________
Harry How To's and items I offer for free, or just to cover the cost of my expenses... http://www.the75andztclub.co.uk/foru...40#post1764540 Fix a poor handbrake; DIY ABS diagnostic unit; Loan of the spanner needed to change the CDT belts; free OBD diagnostics +MAF; Correct Bosch MAF cheap; DVB-T install in an ex-hi-line system; DD install with a HK amp; FBH servicing. I've taken a vow of poverty. To annoy me, send money. |
2nd June 2012, 06:58 | #6 |
Regular poster
MG ZT-T Join Date: May 2012
Location: Crawley
Posts: 60
Thanks: 0
Thanked 2 Times in 2 Posts
|
I didn't have a socket deep enough so I used a crow foot spanner. As the clearance is a bit tight I couldn't get full rotations, so had to keep removing the spanner, spinning it back and then turning more. Took a while, but worked a treat.
|
|
|