|
||
|
|
18th April 2008, 21:22 | #1 |
This is my second home
No longer in the MGR club Join Date: Nov 2006
Location: Tipperary
Posts: 3,933
Thanks: 35
Thanked 51 Times in 35 Posts
|
How to remove leather seat squab/cushion covers
As per the title - where would I find out to do this?
__________________
'Tis better to be silent and be thought a fool, than to speak and remove all doubt. |
18th April 2008, 21:49 | #2 |
Banned
- Join Date: Nov 2006
Location: -
Posts: 10,318
Thanks: 0
Thanked 4 Times in 3 Posts
|
For the rear seats:
"The rear squab will lift at the front and then you have reach to the back and pull backwards slightly. Then you will need either a T42 or T45 to undo the middle seat belt from the floor of the car." - From "Retro fit of rear sunblind PDF" |
18th April 2008, 22:17 | #3 | |
This is my second home
No longer in the MGR club Join Date: Nov 2006
Location: Tipperary
Posts: 3,933
Thanks: 35
Thanked 51 Times in 35 Posts
|
Quote:
I'm going to retro-fit heated seats so I need to get the covers off.
__________________
'Tis better to be silent and be thought a fool, than to speak and remove all doubt. |
|
18th April 2008, 22:32 | #4 |
Banned
- Join Date: Nov 2006
Location: -
Posts: 10,318
Thanks: 0
Thanked 4 Times in 3 Posts
|
As soon as I hit the "Submit" button I thought - bet he's on about the fronts.... Left the post in though just in case.....
|
18th April 2008, 22:52 | #5 |
This is my second home
No longer in the MGR club Join Date: Nov 2006
Location: Tipperary
Posts: 3,933
Thanks: 35
Thanked 51 Times in 35 Posts
|
I probably should have put it in the title
__________________
'Tis better to be silent and be thought a fool, than to speak and remove all doubt. |
19th April 2008, 20:03 | #6 |
Gets stuck in
ZT-T CDT 130+ (04) & 75 Tourer CDT Auto (52) & a 1998 MGF (with HGF!) Join Date: Mar 2007
Location: Halifax
Posts: 903
Thanks: 0
Thanked 1 Time in 1 Post
|
Have you managed to source the elements yet?
I am also looking into doing this along with the cruise control. Might as well get all the buttons on the panel working!! Keep us updated with progress and pics if you would It will be a few weeks before I start working on it in any detail but if you havn't pushed on with it by then we will be able to share resources and gained knowledge! Fairly sure a member has already done this, I think I came across a thread when I was looking for info on retrofitting the memory seats.
__________________
Jim Replace in tank fuel pump with Peugeot alternative Dismantle and re-fit interior and seats Retrofit electric memory seats without the loom All followed at your own risk! Available to borrow: I have a home made (tried and tested) Cam Locking tool for M47 should anyone need it. |
|
|