2.5l V6 Non starting

KOFFEE · 10th April 2022, 12:12

Hi folks got a slight problem.

I was driving along at about 100 KPH and it coughed and stopped. It then would start and run for about two seconds, cough and cut out.

I had to have it towed home and since then I've checked the following

Disconnected the fuel hose from the injector rail and the fuel does come out so the pump is working. I took the bleeding valve out of the injector rail and fuel came out of there.

I replaced the camshaft sensor and the crankshaft sensor. Admittedly, they were secondhand. The timing belt was replaced about a year ago and it is turning.

So where do I go from here? Any ideas?

Be excellent to each other

Damien

10th April 2022, 12:12	#1
KOFFEE Regular poster Rover 75 saloon Join Date: Mar 2014 Location: Brisbane Posts: 34 Thanks: 0 Thanked 0 Times in 0 Posts	2.5l V6 Non starting Hi folks got a slight problem. I was driving along at about 100 KPH and it coughed and stopped. It then would start and run for about two seconds, cough and cut out. I had to have it towed home and since then I've checked the following Disconnected the fuel hose from the injector rail and the fuel does come out so the pump is working. I took the bleeding valve out of the injector rail and fuel came out of there. I replaced the camshaft sensor and the crankshaft sensor. Admittedly, they were secondhand. The timing belt was replaced about a year ago and it is turning. So where do I go from here? Any ideas? Be excellent to each other Damien