|
||
|
8th February 2018, 14:58 | #1 |
Newbie
rover 75 saloon Join Date: Jan 2014
Location: oxford
Posts: 13
Thanks: 2
Thanked 0 Times in 0 Posts
|
Shocker!!
Hi all does anyone have a step by step guide to replacing the rear shock absorbers on a 75. I have a 2.0 v6 but I'm guessing all rovers are same for removal.. Many thanks
|
8th February 2018, 15:52 | #2 |
Gets stuck in
MG ZT Join Date: Jul 2014
Location: Liverpool
Posts: 870
Thanks: 180
Thanked 248 Times in 189 Posts
|
Hi, Remove side trim in boot and push towards rear seat back. This will reveal the upper retaining nut. Remove the nut and then jack up car and remove wheel, you will see where the lower nut is (can't remember size) Using a decent bar and socket remove lower nut, and remove shocker. Replacement is reversal of removal. Have a check on rear spring base while your there just in case.
Lee.
__________________
[SIGPIC][/SIGPIC] |
8th February 2018, 16:37 | #3 |
This is my second home
Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009
Location: Hampshire
Posts: 11,571
Thanks: 3,470
Thanked 3,119 Times in 2,247 Posts
|
Bear in mind that the shock absorber limits the spring travel, so you will need to jack the hub up a bit to take the weight off the shock absorber before undoing anything, and it is secured to the hub by a bolt.
|
11th February 2018, 19:25 | #4 |
This is my second home
Rover 75 cdt club + Rover 2.5 KV6 Conni SE Join Date: May 2008
Location: Birmingham
Posts: 11,424
Thanks: 6,587
Thanked 2,262 Times in 1,729 Posts
|
There are two nuts at the top fixing to undo not one.
__________________
Great Barr, Birmingham. |
|
|