|
||
|
||
|
![]() |
#1 |
Regular poster
rover 75 club cdt se Join Date: Jun 2008
Location: South Queensferry. Scotland
Posts: 31
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Hi all,
Hope some of you audio experts can help me out with this query. I have an alpine (XQE 105560) changer & i want to cut off the multiplug then re-connect it to a wiring loom (audi-vw) that in turn runs via a blue iso plug into the back of my audi navigation plus radio/sat nav unit that i have previously installed into my 75.. What i need is help as to what the 8 wires coming out of the alpine unit correspond too, ie live, earth, speakers & control wire etc... I've tried searching the forum for the info, but my head is swimming with all the different units & wire info that i read.. (im old ![]() Please make an old guy happy & get his cd changer up & running again.. ![]() Many thanks ferryjambo |
![]() |
![]() |
![]() |
#2 |
Regular poster
rover 75 club cdt se Join Date: Jun 2008
Location: South Queensferry. Scotland
Posts: 31
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Anyone Please ??..
![]() |
![]() |
![]() |
![]() |
#3 |
Vis Whiz
Rover 75 2.5 auto Saloon Join Date: Jun 2007
Location: LEEDS
Posts: 20,604
Thanks: 2,057
Thanked 3,056 Times in 1,621 Posts
|
![]() The blue plug (mini Iso) that goes to the changer is numbered
pin number 14 is right front + pin number 17 is right front - pin number 19 is K bus connection pin number 13 left front + pin number 16 left front - pin number 15 neg pin number 7 pos It is here with the colours as well ![]() http://www.the75andztclub.co.uk/foru...92&postcount=1 HTH
__________________
Dave... Lost a few stones ![]() ![]() |
![]() |
![]() |
![]() |
#4 |
This is my second home
75 Join Date: Nov 2006
Location: Leeds
Posts: 8,432
Thanks: 176
Thanked 907 Times in 716 Posts
|
![]() Is this of any help..
![]() Dave T |
![]() |
![]() |
![]() |
#5 |
Regular poster
rover 75 club cdt se Join Date: Jun 2008
Location: South Queensferry. Scotland
Posts: 31
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() thanks, unfortunately the wire colours in the quide don't correspond with the wires on the plug end alpine cd changer ??
![]() i have White. black. yellow. brown. red. green. blue/ with what looks like silver earth wire coming out of the cd changer cable going into it, i suppose this is the player earth ??, then a darker blue/violet coloured wire. I need to know what these wires mean as in live, earth, control & the speaker wires, then i can splice them onto the cable with the blue iso plug that run out of the sat nav down to the glovebox changer.. ![]() I know what the wires on the blue iso socket are, but the 8 wires on the alpine are the problem.. ![]() thanks again though for the help, any ideas/ suggestions would great great on the alpine wires.. thanks ferryjambo ![]() |
![]() |
![]() |
![]() |
#6 |
Avid contributor
rover 75 2.5 V6 auto Join Date: Feb 2008
Location: Alkmaar
Posts: 197
Thanks: 0
Thanked 3 Times in 3 Posts
|
![]() Alpine CDC XQE105560 wire colors:
pin1 Audio Right+ = red pin2 Audio Right- = green pin5 I(K)bus = brown pin6 Audio Left+ = white pin7 Audio Left- = blue pin8 Ground = black pin10 +12V = yellow Hans |
![]() |
![]() |
![]() |
#7 |
Regular poster
rover 75 club cdt se Join Date: Jun 2008
Location: South Queensferry. Scotland
Posts: 31
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() thanks everyone,
i tried splicing the wires using hans instructions, the unit powers up & cycles the cd's ok, but my screens says "No Cd changer"... I was carefull to connect the kbus/control wires correctly between the changer & sat nav but it does'nt see/speak to it ?? ![]() Here's my unit.. ![]() and the back showing the wiring diagram.. ![]() ![]() as you can see from the 3rd image i thought pin 17 (control) on the blue iso plug was the kbus.. I think i should have connected the kbus wire from the alpine onto the Nos.3 pin of the bottom iso marked ( K. Line ).. I'll try this tomorrow & see if this enables the changer & sat nav unit to "talk" to each other... ![]() |
![]() |
![]() |
![]() |
#8 |
Vis Whiz
Rover 75 2.5 auto Saloon Join Date: Jun 2007
Location: LEEDS
Posts: 20,604
Thanks: 2,057
Thanked 3,056 Times in 1,621 Posts
|
![]() I would think that would be the only option
![]() Are you sure the changer is in working order ![]() good luck
__________________
Dave... Lost a few stones ![]() ![]() |
![]() |
![]() |
![]() |
#9 | |
Regular poster
rover 75 club cdt se Join Date: Jun 2008
Location: South Queensferry. Scotland
Posts: 31
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Quote:
If this does'nt work, then it's a cheap vw,audi,skoda,seat cd changer off fleabay that is a simple plug & play i've been told also, but as the alpine unit was here gathering dust i thought i'd have a go getting it up & running again saving me some cash too..:lol: I'll try the kbus wiring fix & see if that cures the sat nav unit not seeing the cd changer.. thanks again for your input, it's good to know fellow 75 owners can offer advice & tips to people in need like me too ![]() thanks ferryjambo ![]() |
|
![]() |
![]() |
![]() |
#10 |
Moderator
MG-ZTT Join Date: Mar 2007
Location: Ware, Herts
Posts: 19,798
Thanks: 161
Thanked 1,249 Times in 1,036 Posts
|
![]() slightly different angle, is the Audi unit a good fit in the dash, and what fuctionality does it have...
__________________
David Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics] |
![]() |
![]() |
![]() |
|
|