|
||
|
9th January 2012, 21:26 | #1 |
Avid contributor
Rover75 Join Date: Jul 2011
Location: west mids
Posts: 234
Thanks: 0
Thanked 0 Times in 0 Posts
|
odd bit
Ok i have a fairly constant supply of odd bits
(e.g) the bits you loose when carring out other jobs Scrivets for wheel arches self tappers odd fixings etc I am willing to help anyone with the above IF AVAILABLE at the time of asking please don't ask for doors bonnets or anything that is of real value |
10th January 2012, 07:31 | #2 |
Gets stuck in
Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008
Location: Chatteris, Cambridgeshire
Posts: 918
Thanks: 320
Thanked 159 Times in 127 Posts
|
If you can help, I'm looking for the following bits?
engine undertray fixings (screws & chassis fasteners) front scuttle(? at base of windscreen) fixings also the pipe clips for the breather hoses on top of the engine, similar to quickfit push in plumbing connectors, both sizes. Car is KV6 2.5 auto. Stewart |
10th January 2012, 08:14 | #3 |
Loves to post
MG ZT-T Join Date: Aug 2011
Location: Chorley
Posts: 304
Thanks: 4
Thanked 2 Times in 2 Posts
|
Hi,
I could do with a few of the clips that secure the plenum cover, some of mine are a bit ragged where they have been levered up with something sharp... Thanks Mark PS - am happy to pay!
__________________
2006 ZT-T CDTi 135 [SIGPIC][/SIGPIC] |
10th January 2012, 21:52 | #4 | |
Avid contributor
Rover75 Join Date: Jul 2011
Location: west mids
Posts: 234
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
That would be the RED push part? scuttle panel fasteners i have |
|
10th January 2012, 21:56 | #5 | |
Avid contributor
Rover75 Join Date: Jul 2011
Location: west mids
Posts: 234
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
How many do you NEED as above post will Req a couple. F.O.C p.m your Address |
|
10th January 2012, 22:16 | #6 |
This is my second home
75 Contemporary SE Mk II 2004 Man. Sal. CDTi 135ps, FBH on red diesel, WinCE6 DD Join Date: May 2010
Location: Leeds
Posts: 17,273
Thanks: 2,160
Thanked 2,061 Times in 1,586 Posts
|
Unlikely request, but I'm looking for a length of the semi rigid small fuel pipe which feeds the FBH. I need about four or five feet, to enable me to get from the pump at the rear, to a small tank I'm looking to add in the boot area for red diesel.
__________________
Harry How To's and items I offer for free, or just to cover the cost of my expenses... http://www.the75andztclub.co.uk/foru...40#post1764540 Fix a poor handbrake; DIY ABS diagnostic unit; Loan of the spanner needed to change the CDT belts; free OBD diagnostics +MAF; Correct Bosch MAF cheap; DVB-T install in an ex-hi-line system; DD install with a HK amp; FBH servicing. I've taken a vow of poverty. To annoy me, send money. |
11th January 2012, 00:49 | #7 |
This is my second home
None * DROWNED Join Date: Aug 2007
Location: Cardigan
Posts: 33,339
Thanks: 1,257
Thanked 1,664 Times in 1,081 Posts
|
Guys 'n' gals... please note that the OP is doing this FOC.
But please, also be aware that although he is not charging for the bits that he can provide, it would only be fair to point out that postage and courier charges of the parts are costing him. So if he asks for carriage costs, so long as they are reasonable, it is perfectly acceptable on this forum. This applies to all, except when collected in person
__________________
Andrew Ich Dien Problem solving is... lateral thinking SEARCH FIRST ...ASK LATER... |
11th January 2012, 09:05 | #8 |
Gets stuck in
Rover 75 Connoisseur 2.5 V6 auto Join Date: Jan 2008
Location: Chatteris, Cambridgeshire
Posts: 918
Thanks: 320
Thanked 159 Times in 127 Posts
|
yes though I have seen them in black too
Stewart |
11th January 2012, 09:36 | #9 |
Loves to post
75 conny Join Date: Aug 2011
Location: black country
Posts: 264
Thanks: 0
Thanked 0 Times in 0 Posts
|
do you have any clips to secure undertray many thanks
|
11th January 2012, 21:30 | #10 |
Avid contributor
Rover75 Join Date: Jul 2011
Location: west mids
Posts: 234
Thanks: 0
Thanked 0 Times in 0 Posts
|
Sorry my friend not at the moment
|
|
|