|
||
|
2nd March 2020, 22:39 | #311 |
Posted a thing or two
MG ZT 190 + and MKIV Supra Join Date: Jan 2009
Location: Plymouth
Posts: 1,551
Thanks: 224
Thanked 493 Times in 359 Posts
|
so on the home straight and the car has been out for a test drive
Cat fitted onto the 2 x manifolds IMG_20200228_204148 by Jon Christie, on Flickr and the twin exhaust fitted. this one comes in 4 sections and to be honest the tail pipes have always been slightly out but as I got this from the blue ZT I broke I kind of live with it IMG_20200301_163011 by Jon Christie, on Flickr I then ran the car and vented and filled the power steering reservoir to fill the power steering system. I have alway bled my hydraulic systems this way: 1. Top up reservoir 2. Start engine at idle keeping fluid level in reservoir (it will disappear quickly) 3. Stop engine and allow aeration to disappear in reservoir, then top up. 4. start engine at idle and allow fluid level to stabilise. 5. move rack from full lock to full lock SLOWLY to allow system to vent. 6. Check for leaks. I then monitored all the dashboard for warnings, nothing came up including the ABS (few) The car was then lowered off the stands and the final 3 x fastenings torqued up. the front wheel drive shaft nuts (350NM!) and then indented, IMG_20200301_155952 by Jon Christie, on Flickr And the steering column nut and the cover replaced over the coupling IMG_20200301_194937 by Jon Christie, on Flickr Finally after what seems like an age the car sits on her boots again but boy she is dusty IMG_20200301_192441 by Jon Christie, on Flickr Finally taken outside for the first time since the Autumn and given a wash. My new toy sat behind in the drive IMG_20200302_181539 by Jon Christie, on Flickr I took the car for a test drive and all is good. She feels tight, responsive steering and really solid ride. The only thing I have to do is adjust the handbrake as its not quite right and get the 4 wheel alignment done I will take some photos at the weekend with her new suspension stance and then I think thats the end of this mammoth story and my input into this topic. I do have one more job which is to get the IPK fitted and T4ed. I will have to get the car to Lynn at Newton Abbot for that but hopefully sometime soon. A happy bunny tonight.
__________________
Jon C Living the dream MK IV VVTI Tiptronic TT Toyota Supra MG ZT 190+
BornTuesday, 10th July 2001 @ 09:01:10 259th ZT to run off the production line, out of 18,894 252nd ZT 190 + to be made out of 4,023 101st ZT in Solar Red (code: CEU) to be made out of 1,888 |
2nd March 2020, 22:42 | #312 |
This is my second home
ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007
Location: Conwy NORTH WALES
Posts: 11,094
Thanks: 512
Thanked 1,116 Times in 763 Posts
|
New pedal rubbers to finish the job ?!
__________________
[SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block |
4th March 2020, 15:27 | #313 |
Posted a thing or two
MG ZT 190 + and MKIV Supra Join Date: Jan 2009
Location: Plymouth
Posts: 1,551
Thanks: 224
Thanked 493 Times in 359 Posts
|
Fair one mate. Hadn't even thought about the rubbers as my feet are on them rather than my eyes.
A pair of OE spec ordered
__________________
Jon C Living the dream MK IV VVTI Tiptronic TT Toyota Supra MG ZT 190+
BornTuesday, 10th July 2001 @ 09:01:10 259th ZT to run off the production line, out of 18,894 252nd ZT 190 + to be made out of 4,023 101st ZT in Solar Red (code: CEU) to be made out of 1,888 |
4th March 2020, 20:17 | #314 |
Posted a thing or two
2004 mk1 Rover 75 1.8T Club SE saloon (auto) Join Date: Jul 2013
Location: Enniskillen
Posts: 1,307
Thanks: 670
Thanked 254 Times in 222 Posts
|
Congratulations Jon
It's a pretty huge accomplishment to get all that work done by yourself - within what is actually a relatively short period of time. And it must be immensely satisfying to get driving it down the road now? Thanks for all the information and effort you've put into this thread also - lots of information and photos for simpletons like myself to digest! If I may, could I ask you to add a couple of photos of under the right hand side rear exhaust hanger/s and floorpan? As I'd like to see how you shimmied around the charcoal canister etc. to get it to fit (really want to get quad exhausts fitted to my own car at some point). Cheers, Karl. |
4th March 2020, 21:50 | #315 | |
Posted a thing or two
MG ZT 190 + and MKIV Supra Join Date: Jan 2009
Location: Plymouth
Posts: 1,551
Thanks: 224
Thanked 493 Times in 359 Posts
|
Quote:
__________________
Jon C Living the dream MK IV VVTI Tiptronic TT Toyota Supra MG ZT 190+
BornTuesday, 10th July 2001 @ 09:01:10 259th ZT to run off the production line, out of 18,894 252nd ZT 190 + to be made out of 4,023 101st ZT in Solar Red (code: CEU) to be made out of 1,888 |
|
2nd May 2020, 23:09 | #316 |
Posted a thing or two
MG ZT 190 + and MKIV Supra Join Date: Jan 2009
Location: Plymouth
Posts: 1,551
Thanks: 224
Thanked 493 Times in 359 Posts
|
Firstly apologies to Mighty Quinn. I owe you some photos.
I have been so busy during this mad period with CV-19 lock down I have not had much time to myself. So firstly for you mate some photos of the canister moved to fit the double exhaust. Hopefully this shows how far I moved it and how it was re mounted to allow the drivers side silencer to pass by IMG_20200308_203015 by Jon Christie, on Flickr IMG_20200308_203028 by Jon Christie, on Flickr IMG_20200308_203037 by Jon Christie, on Flickr IMG_20200308_203045 by Jon Christie, on Flickr Just for Jules I renewed the pedal rubbers IMG_20200314_153707 by Jon Christie, on Flickr And finally some pictures of the car on the road with her new lower stance. i think it suits the ZT and with all the work I did on the suspension the ride is not what I would call hard. My Supra has a more solid ride si happy with the outcome and the look. IMG_20200502_170927 by Jon Christie, on Flickr IMG_20200502_170937 by Jon Christie, on Flickr IMG_20200502_170947 by Jon Christie, on Flickr This is probably as far as I can take this thread to be honest as everything apart from a full engine rebuild has been done on this car and she is now how I would like her. I still have to get to Lynn in Newton Abbot for the message IPK fit and T4 but that will have to wait until we are out of these mad times If a MOD wants to sticky this or move it elsewhere for a record for others to use thats fine by me. Thanks to the following suppliers who I have used whilst doing this:- fellow members. This club really is one of the best Matt and DMGRS Trikey and the other numerous traders who I have spent money with Rimmers. Yep had to use them at times MG mania Kayfast who I used for most of the fastenings I have not added up the invoices in the folder, maybe one day Hope people have and will find this useful as a reference and thanks for all the comments it is appreciated. I will stay around the forum because this car is a keeper and its a superb place to be. I will be driving her daily as the commuter so normal issues for this marque will arise My next project will be taking my time in the garage so another forum is where I am reading and asking questions as I know little of these cars. She is an Alfa 159 2.4 with 80K on the clock in top spec. Mapped to 260BHP and 400Nm torque. Superb to drive and quite a few jobs already done which these cars need. . I will be giving her the same treatment as the Zed. but I am sure the Italian engineering will push my limits IMG_20200226_173752 by Jon Christie, on Flickr IMG_20200226_173737 by Jon Christie, on Flickr Stay safe everyone and keep that social distancing going we will come out the otherside
__________________
Jon C Living the dream MK IV VVTI Tiptronic TT Toyota Supra MG ZT 190+
BornTuesday, 10th July 2001 @ 09:01:10 259th ZT to run off the production line, out of 18,894 252nd ZT 190 + to be made out of 4,023 101st ZT in Solar Red (code: CEU) to be made out of 1,888 |
3rd May 2020, 07:48 | #317 |
This is my second home
ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007
Location: Conwy NORTH WALES
Posts: 11,094
Thanks: 512
Thanked 1,116 Times in 763 Posts
|
Great project Jon.
Nice to see one saved in such an epic way! I might suggest the canister move might need a lot more heat shielding from that new exhaust, difficult to tell from pics though Nice Alfa BTW. Needs to be Red to match yer ZT
__________________
[SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block |
|
|