ATTENTION PLEASE Navall 1 owners with Android 2.3 - Page 5

Godfer · 21st April 2015, 17:59

Quote:

Originally Posted by Godfer

Guys, how long should it take? Mine's been stuck on upgrading mcu... for about 25 mins now?

Ta,

Sid

It had 'hung' during installation. I had to reset and re-install, now all done! Will configure it all in the 'morrow.

Radioguy · 21st April 2015, 19:10

Quote:

Originally Posted by David Lawrence

How do i set the TV to digital on this one. All i can get is star trek, cant change channels and the old #*97823 doesnt seem to do anything in this one.

Also how do i get igo primo back. It is on the card, but dont know how to get it to look there again. (Now fixed igo, forgot i needed to navigate to the folder using the explorer and reinstall the ipk first, then set the navi path to igo.)

Just the tv issue to fix, oh and i also have the garbled music albums, it looks like the resolution has changed from 4 albums wide to just 3 albums wide.

David the New Password is ##0323

David Lawrence · 21st April 2015, 19:55

Quote:

Originally Posted by Radioguy

David the New Password is ##0323

Ok, tv fixed, igo fixed, tts voices restored.

Everything working as they should with the following exceptions

1. Radio with AF turned on becomes very distorted and noisy, so needs to be turned off. Same as before really, since it didnt work before either.

2. The music player does not display the track titles completely or the album names properly, in fact many albums it displays appear to be empty as well.

3. rover boot logo is not there any more. I seem to recall on the last version there was a way of setting the boot logo from a stored photo, but cant remember if i just imagined that or not. I have found a photo on my sd card though and cant think of any other reason why it would be there.

If we can nail these issues it will be a pretty decent version. Time will tell if it is more stable with regards to framework errors and so on, but i spotted what looks like an app to fast flush the caches which might help with that.

wnj516 · 21st April 2015, 20:19

Thanks Jeff once I saw your video and made a new copy of Igo primo2, it installed faultlessly, and now operating from the SD card.
Many thanks again
Nigel

coolcat · 21st April 2015, 20:23

Quote:

Originally Posted by wnj516

Thanks Jeff once I saw your video and made a new copy of Igo primo2, it installed faultlessly, and now operating from the SD card.
Many thanks again
Nigel

Your very welcome Sir

Sorry I can't answer other questions on the new firmware as I haven't yet had a chance to look at it, I'm reading all the responses on here to see what's what

David Lawrence · 21st April 2015, 20:40

Quote:

Originally Posted by coolcat

Your very welcome Sir

Sorry I can't answer other questions on the new firmware as I haven't yet had a chance to look at it, I'm reading all the responses on here to see what's what

Im assuming the music player issue is an easy fix if you guys could recommend us a suitable app to install instead. There seem to be plenty out there. The logo issue got fixed in the earlier version so im sure it will be again in this one.

lived without radio AF for this long, so thats not a show stopper, just frustrating.

Radioguy · 22nd April 2015, 03:24

Quote:

Originally Posted by David Lawrence

Im assuming the music player issue is an easy fix if you guys could recommend us a suitable app to install instead. There seem to be plenty out there. The logo issue got fixed in the earlier version so im sure it will be again in this one.

lived without radio AF for this long, so thats not a show stopper, just frustrating.

Hi David

Did you try Poweramp?

Sean

David Lawrence · 22nd April 2015, 05:22

Quote:

Originally Posted by Radioguy

Hi David

Did you try Poweramp?

Sean

Poweramp is one of the apps i saw while searching but didnt want to put anything on unless it came with a recommendation from you guys first, so will give that a go tonight. Thanks

Any way of setting the boot logo to an image on the sd?

Simondi · 22nd April 2015, 06:20

Quote:

Originally Posted by Radioguy

Hi David

Did you try Poweramp?

Sean

Is there a way to make Poweramp or similar the default music player?

petergw60 · 22nd April 2015, 12:43

Hi Sean,
Sent money as requested to Tony. Confirmed my address in reply to your email but not heard from you when or if you received it!
My unit has now decided to throw the "The appliaction Launcher (process com.android.launcher) has stopped unexpectedly. Please try again. Force close"
So, I believe I need the firmware to sort this. If there is going to be a delay in the update, please can I have a copy of the original firmware.
By the way I am religously turning the unit off before the ignition so don't know why this glitch has appeared.
Regards,
Peter

21st April 2015, 20:19	#44
wnj516 Avid contributor ZT400 SE Join Date: Jan 2007 Location: Llanelli, S Wales Posts: 155 Thanks: 7 Thanked 15 Times in 15 Posts	Thanks Jeff once I saw your video and made a new copy of Igo primo2, it installed faultlessly, and now operating from the SD card. Many thanks again Nigel

22nd April 2015, 12:43	#50
petergw60 Regular poster Rover 75 Connoisseur SE CDT Join Date: Nov 2010 Location: St Ives Posts: 90 Thanks: 12 Thanked 3 Times in 3 Posts	Hi Sean, Sent money as requested to Tony. Confirmed my address in reply to your email but not heard from you when or if you received it! My unit has now decided to throw the "The appliaction Launcher (process com.android.launcher) has stopped unexpectedly. Please try again. Force close" So, I believe I need the firmware to sort this. If there is going to be a delay in the update, please can I have a copy of the original firmware. By the way I am religously turning the unit off before the ignition so don't know why this glitch has appeared. Regards, Peter