|
||
|
25th March 2017, 09:54 | #1 |
Newbie
MG ZT Join Date: May 2012
Location: Nottingham
Posts: 13
Thanks: 0
Thanked 1 Time in 1 Post
|
Reverse sensor snapped
Hi all,
Went to change my reverse light sensor and it snapped as I was undoing it, leaving all of the threaded part in there. Any ideas how to get the rest of it out without doing any damage? Will the gear box oil come out through the hole where the plunger sits if I drive it? Cheers, Andy |
25th March 2017, 10:42 | #2 |
This is my second home
Rover 75 CDTi Connoisseur SE & MG ZT Saloon 190 Join Date: Jun 2007
Location: Coven
Posts: 12,523
Thanks: 526
Thanked 1,877 Times in 885 Posts
|
The oil level is below the sensor so shouldn't come out but be careful you don't get anything inside whist removing the rest of it, a picture might help decide best way to get it out so we can see what you are dealing with
__________________
www.midlandsnanomeets.co.uk Robs Car Gallery Coven near Wolverhampton WV9 2000 Cowley Built Rover 75 2.0 V6 Club SE/ Atlantic Blue/ Sandstone/Walnut (daily driver) 2003 Land Rover Freelander 1 TD4 HSE Helsinki Blue/Black Leather (swmbo daily driver) |
25th March 2017, 12:15 | #3 |
Newbie
MG ZT Join Date: May 2012
Location: Nottingham
Posts: 13
Thanks: 0
Thanked 1 Time in 1 Post
|
Thanks Trebor, I managed to use a torx key to unscrew it. New one fitted and all working.
|
|
|