|
||
|
13th October 2018, 09:15 | #21 |
Avid contributor
MG ZT -T Join Date: Feb 2016
Location: Rhuddlan
Posts: 115
Thanks: 31
Thanked 13 Times in 13 Posts
|
re heater issues
I am with Kaiser on this - due to experience. Everyone kept saying blocked matrix, so £100 and lots of swearing later I am still in the same position. So, I watched the heat control motor as I pressed the heat control button - yes you may 'hear it working' what you cannot hear is that the motor (basically a stepper type motor) is either going fully on (full heat) or fully off (no heat) - no inbetween.
I removed the motor and cable tied the actuator arm approx half way ( medium heat) and I have heat all the time as I should. So, the heat control motors 'should' move and stop in stages as per heat selection - if they are faulty and going either on or off ie you may be selecting medium heat but as the motor is not 'stepping' it is simply going hot to cold - this gives a similar issue to the blocked matrix syndrome and can affect either side - or both when the selected temperature difference per side is too great.
__________________
Paul (AKA Fishytroll) |
|
|