|
||
|
|
5th October 2012, 21:37 | #1 |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,799
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
The tubes should be in place on all models from 99 through to the time of closure, if not there i have heard that some dealer removed the tubes why i dont know maybe thinking its the best bet other than ECU damage if missing i would suggest replacing.
I am in the process of adding to this thread the spyhole mod, and the plenum leaf collector with pics as always so they are all in one place on a thread to save new members searching from one post or thread to another. The first chance i get i will try and get a camera down the plenum chamber with the tube removed and see what lies below Arctic.
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " Last edited by Arctic; 6th October 2012 at 00:07.. |
5th October 2012, 21:49 | #2 |
Banned
MG ZT V6 190+ Join Date: Sep 2008
Location: Leeds
Posts: 33,223
Thanks: 41
Thanked 1,614 Times in 1,416 Posts
|
Here's a picture of the Plenum guard which is supplied by Jules.
|
6th October 2012, 00:41 | #3 |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,799
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Leaf stopper/collector
To help stop leaves and debris from getting into the plenum below you can use this gutter netting very cheap and does the job wonderful brought from pound shop,lidil and Aldi.
One roll will do eight cars so if you are going to any meets a worth while mod to do takes about 20 mins to do both sides you will need sissors four cable ties one gutter grip and a rule. Fig 1 1 Cut two pieces of the wire 15" long Fig 2 2 Next cut down lengthways and 2.5" in from the edge by 5" both pieces of wire Fig 3/4 3 4 Next trim the corner of both pieces of the netting you can do the while fitting it to the car to get a more acurate cut i am able to do it because i have a template Fig 5/6 5 6 All the parts ready for fitting to the car over the wing plenum tubes near and offsides Fig 7 7 To fit remove the front and rear scuttle clips as in the plenum photo shoot at the start of the thread, this will help when you feed the netting under the scuttle to seal the appeture/gap over the tubes, if you did not cut the corner before you can cut it to shape now Fig 8 8 Once you have cut to shape and held the nett in place by the bolts holding the bonnet hinge and the gutter clip near side passenger drill two 5mm holes for the cable ties Fig 9 9 Cable ties attached Fig 10 10 A little nick in the nett so the tube can be rodded Fig 11 11 Neat finished job all for £1 or £2.49 the most and 20 mins of your time at home or a meet Fig 12-14 12 13 14 This is real easy and well worth doing Arctic. .
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
6th October 2012, 11:39 | #4 | |
This is my second home
ZTT, Contemp Saloon, Duotone Tourer Join Date: May 2012
Location: Llandeilo
Posts: 4,192
Thanks: 290
Thanked 387 Times in 333 Posts
|
Quote:
I think this looks to me like a dealer mod on mine then as the tube is absent and I can clearly see the road below. (and I can pretty much hose it and no water comes in anywhere?? |
|
|
|