Fog lights loom YMD001080

[marinabrian]

Originally Posted by grivas

Hi thanks for quick reply can you physically reach the connector from engine bay without bumper off as I aim to replace existing loom with new to fit fogs

It's much easier to fit the fog lights with the bumper off, and you will see the grey plug connecting everything attached to the inner wing behind the N/S headlamp.

Don't forget though you will need the front foglight relay fitting to the underbonnet fusebox, and the front panel from the LSM, which unplugs internally to be swapped, but not the whole LSM

Have fun

Brian

P.S. the wiring is clipped to various points inside the front bumper, and you will need to remove the bumper to fit the new wiring properly

[grivas]

Originally Posted by marinabrian

It's much easier to fit the fog lights with the bumper off, and you will see the grey plug connecting everything attached to the inner wing behind the N/S headlamp.

Don't forget though you will need the front foglight relay fitting to the underbonnet fusebox, and the front panel from the LSM, which unplugs internally to be swapped, but not the whole LSM

Have fun

Brian

P.S. the wiring is clipped to various points inside the front bumper, and you will need to remove the bumper to fit the new wiring properly

Hi Brian that makes good sense and explains the process clearly thank you all very much once again for quick replies I have all the bits as they say but waiting for relay to arrive.