Removing pedal box Cdi auto

Northern Soul · 24th March 2017, 20:12

Hello, I don't have a Haynes manual and I wondered if anyone could point me in right direction as to how to remove the peddle box in my auto as I have to fit a new interior fan blower.

Phil-T4 · 24th March 2017, 20:16

Remove the steering column first, undo the clutch master cylinder, remove the brake pedal and 4 nuts from the brake servo, disconnect the brake, clutch and throttle pot connectors, undo the 4 bolts holding to the bulkhead.

Think that is it from memory!

Northern Soul · 24th March 2017, 20:21

Hi thanks for that but????... Clutch master cylinder on and auto??

Phil-T4 · 24th March 2017, 20:23

Missed that bit

Ignore the clutch switch connector too then

Northern Soul · 24th March 2017, 20:26

Thank you, much appreciated ;-)

kbonney88 · 24th March 2017, 20:43

Thanks Phil, I may have this job on too.. .. fingers crossed I don't..

Kev

Northern Soul · 25th March 2017, 09:38

Done mine, replaced heater blower WITHOUT removing pedal box

, heater working lovely !!

Northern Soul · 26th March 2017, 21:45

20 min job too!

24th March 2017, 20:12	#1
Northern Soul Regular poster Rover 75 Saloon Join Date: Oct 2013 Location: Knottingley Posts: 50 Thanks: 6 Thanked 3 Times in 3 Posts	Removing pedal box Cdi auto Hello, I don't have a Haynes manual and I wondered if anyone could point me in right direction as to how to remove the peddle box in my auto as I have to fit a new interior fan blower.

24th March 2017, 20:16	#2
Phil-T4 I really should get out more....... MG ZT-T, Rover 75 Tourer Join Date: Mar 2011 Location: Olney Posts: 2,969 Thanks: 245 Thanked 1,088 Times in 657 Posts	Remove the steering column first, undo the clutch master cylinder, remove the brake pedal and 4 nuts from the brake servo, disconnect the brake, clutch and throttle pot connectors, undo the 4 bolts holding to the bulkhead. Think that is it from memory!

24th March 2017, 20:21	#3
Northern Soul Regular poster Rover 75 Saloon Join Date: Oct 2013 Location: Knottingley Posts: 50 Thanks: 6 Thanked 3 Times in 3 Posts	Hi thanks for that but????... Clutch master cylinder on and auto??

24th March 2017, 20:23	#4
Phil-T4 I really should get out more....... MG ZT-T, Rover 75 Tourer Join Date: Mar 2011 Location: Olney Posts: 2,969 Thanks: 245 Thanked 1,088 Times in 657 Posts	Missed that bit Ignore the clutch switch connector too then

24th March 2017, 20:26	#5
Northern Soul Regular poster Rover 75 Saloon Join Date: Oct 2013 Location: Knottingley Posts: 50 Thanks: 6 Thanked 3 Times in 3 Posts	Thank you, much appreciated ;-)

24th March 2017, 20:43	#6
kbonney88 I really should get out more....... Rover 75 Tourer & 75 Saloons Join Date: Apr 2012 Location: Perth/Glasgow Scotland Posts: 2,313 Thanks: 804 Thanked 656 Times in 512 Posts	Thanks Phil, I may have this job on too.. .. fingers crossed I don't.. Kev

25th March 2017, 09:38	#7
Northern Soul Regular poster Rover 75 Saloon Join Date: Oct 2013 Location: Knottingley Posts: 50 Thanks: 6 Thanked 3 Times in 3 Posts	Done mine, replaced heater blower WITHOUT removing pedal box , heater working lovely !!

26th March 2017, 21:45	#8
Northern Soul Regular poster Rover 75 Saloon Join Date: Oct 2013 Location: Knottingley Posts: 50 Thanks: 6 Thanked 3 Times in 3 Posts	20 min job too!