|
||
|
24th March 2008, 12:19 | #1 |
This is my second home
75 Join Date: Nov 2006
Location: Leeds
Posts: 8,432
Thanks: 176
Thanked 907 Times in 716 Posts
|
Change a Harmony for a Symphony
This picture shows the plug C0981 that goes into the back of the Harmony radio.
To replace the Harmony with a Symphony you will have to buy a lead part no. VUL100300, cost about £40.[from Rimmer Bros.] this lead plugs into Plug C0981 and converts it to ISO connectors. The next picture shows the back of the Symphony with a new lead similar to VUL100300 pluged into the ISO connectors. You can see the Orange wire in pin 2 and the Purple in pin 3 [these are for demo. purpose in the loom they will be Blue/Orange and Blue/Purple.] Also you will notice there is no wire in pin 1 [this has to be removed as its for phone mute] Dave T Last edited by Dragrad; 30th April 2016 at 00:38.. Reason: Pics repaired. |
|
|