DVB-T2 digibox problem

maxi_crawf · 11th May 2015, 16:08

Well I finally decided to have a go fitting my digibox as above, the problem is, no picture

I have connected up the power lead as mentioned on another thread (live feed from the TV tuner and a switched live from the radio box and earth to the body) I assume it must be ok as the LED power lamp lights up on the digibox, the antenna is connected as is the remote "eye" I have the three RCA? plugs from the back of the digibox connecting to the separate short "splicing/adaptor cable/loom that goes between the TV tuner and the original plug so you can "inject" the digibox signal into the loom, the TV/monitor screen is switched to the AV channel but there is nothing, just a blank screen with the word "mute" at the bottom, does not matter what you press on the remote hand set nothing happens, by the way the remote handset is working.

Any chance it's something really simple I have forgotten to do, it probably is

suffolk boy · 11th May 2015, 16:26

it is not picking up a signal.try moving to another area.its for this reason I took mine out.i thought mine was duff.moved up the road all was well.(we live in a dip).but after that it was very hit and miss.worth a try anyhow

maxi_crawf · 11th May 2015, 16:40

Quote:

Originally Posted by suffolk boy

it is not picking up a signal.try moving to another area.its for this reason I took mine out.i thought mine was duff.moved up the road all was well.(we live in a dip).but after that it was very hit and miss.worth a try anyhow

Thing is, there is nothing on the screen not even a "no signal" message, I assumed that there will be something on the screen same as you get with a TV at home, does not the digibox itself put some kind of "set up" message to tell you what to do, on the monitor?

suffolk boy · 11th May 2015, 17:19

it should go into the set up menu.then you tune it in to get the stations.i was then I could get nothing until I moved the car.you must have answer A a duff box.or B it connected up it wrong. I no I found it a bit confusing with the av in and out bit .and on mine it turned out you connect it the opposite to what my feeble brain was telling me

coolcat · 11th May 2015, 17:21

You should still get the on screen display up when you press menu on the remote regardless of aerial signal

I would double check that the yellow (video) RCA connector is in the correct Av in connection on the double din and not in the camera in or the Av out

If all that is correct then as Phil says, possibly a duff box !

maxi_crawf · 11th May 2015, 18:47

There is no rca connector on the back of the double din, it's an original highline TV monitor/screen

11th May 2015, 16:08	#1
maxi_crawf Posted a thing or two R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006 Location: Kingston-upon-Hull Posts: 1,960 Thanks: 823 Thanked 426 Times in 274 Posts	DVB-T2 digibox problem Well I finally decided to have a go fitting my digibox as above, the problem is, no picture I have connected up the power lead as mentioned on another thread (live feed from the TV tuner and a switched live from the radio box and earth to the body) I assume it must be ok as the LED power lamp lights up on the digibox, the antenna is connected as is the remote "eye" I have the three RCA? plugs from the back of the digibox connecting to the separate short "splicing/adaptor cable/loom that goes between the TV tuner and the original plug so you can "inject" the digibox signal into the loom, the TV/monitor screen is switched to the AV channel but there is nothing, just a blank screen with the word "mute" at the bottom, does not matter what you press on the remote hand set nothing happens, by the way the remote handset is working. Any chance it's something really simple I have forgotten to do, it probably is

11th May 2015, 16:26	#2
suffolk boy This is my second home fiat panda Join Date: Sep 2009 Location: haverhill Posts: 6,720 Thanks: 96 Thanked 586 Times in 526 Posts	it is not picking up a signal.try moving to another area.its for this reason I took mine out.i thought mine was duff.moved up the road all was well.(we live in a dip).but after that it was very hit and miss.worth a try anyhow __________________ fiat panda 1.2 eco

11th May 2015, 17:19	#4
suffolk boy This is my second home fiat panda Join Date: Sep 2009 Location: haverhill Posts: 6,720 Thanks: 96 Thanked 586 Times in 526 Posts	it should go into the set up menu.then you tune it in to get the stations.i was then I could get nothing until I moved the car.you must have answer A a duff box.or B it connected up it wrong. I no I found it a bit confusing with the av in and out bit .and on mine it turned out you connect it the opposite to what my feeble brain was telling me __________________ fiat panda 1.2 eco

11th May 2015, 17:21	#5
coolcat This is my second home Audi Q3 TDI S-Line Quattro Join Date: Jul 2007 Location: Clacton On Sea/On the boat somewhere Posts: 51,221 Thanks: 9,890 Thanked 12,235 Times in 8,232 Posts	You should still get the on screen display up when you press menu on the remote regardless of aerial signal I would double check that the yellow (video) RCA connector is in the correct Av in connection on the double din and not in the camera in or the Av out If all that is correct then as Phil says, possibly a duff box ! __________________ Jeff.

11th May 2015, 18:47	#6
maxi_crawf Posted a thing or two R75 Saloon Conn CDT SE, MG ZT190+ Join Date: Nov 2006 Location: Kingston-upon-Hull Posts: 1,960 Thanks: 823 Thanked 426 Times in 274 Posts	There is no rca connector on the back of the double din, it's an original highline TV monitor/screen