Brake hoses

Robti · 10th April 2024, 12:09

Hi where are we buying from atm ?
Thanks

Lee T · 10th April 2024, 12:44

Last pair of front hoses I bought were from a motor factors. They had them in stock, they were the standard size not the longer 190 hoses but worth a call.

xsport · 10th April 2024, 13:01

Make sure you get the correct ones in length.as fronts and rears are different and also different for the ZT . There are braided option to choose from as well. I bought a set off ebay , and had to return them. I checked them over before fitting and it never occurred to me to blow through it ! Yes it was blocked . Over crimped i should imagine at the joins. Very annoying and set me back a few days. Buy off a reputable supplier and be fairly confident that A , they will fit in length and B they are a decent manufacturer. Some of these hoses use very thin alloy couplings which can snap very easily,and thats with good due care to fitting and tightening. ... good luck ..

chris75 · 11th April 2024, 18:57

Have you had a look at DMGRS ?
https://www.dmgrs.co.uk/collections/...nd-pads?page=1
They are members on here and many of us use them

Club discount available too

Devilish · 12th April 2024, 08:24

When I replaced mine I bought genuine F & R from Best of British, went to put them in the box in the garage loft and there was already a set in there, DUH.

10th April 2024, 12:09	#1
Robti Posted a thing or two MG ZT-T 190+,Rover 800 vitesse coupe Join Date: Aug 2014 Location: Hamilton Posts: 1,971 Thanks: 616 Thanked 228 Times in 210 Posts	Brake hoses Hi where are we buying from atm ? Thanks __________________ Robert

10th April 2024, 12:44	#2
Lee T Gets stuck in MG ZT Join Date: Jul 2014 Location: Liverpool Posts: 858 Thanks: 180 Thanked 248 Times in 189 Posts	Last pair of front hoses I bought were from a motor factors. They had them in stock, they were the standard size not the longer 190 hoses but worth a call. __________________ [SIGPIC][/SIGPIC]

11th April 2024, 18:57	#4
chris75 same car since 2005 2001 Rover 75 2.0 v6 Connoisseur Saloon Join Date: Nov 2006 Location: Ellesmere Port , Cheshire Posts: 3,811 Thanks: 379 Thanked 549 Times in 466 Posts	Have you had a look at DMGRS ? https://www.dmgrs.co.uk/collections/...nd-pads?page=1 They are members on here and many of us use them Club discount available too __________________ Who said it was simples ?

12th April 2024, 08:24	#5
Devilish Been round the block 75 Tourer Join Date: Apr 2009 Location: Cannock Posts: 4,126 Thanks: 3 Thanked 189 Times in 121 Posts	When I replaced mine I bought genuine F & R from Best of British, went to put them in the box in the garage loft and there was already a set in there, DUH. __________________ If at first you don't succeed, hide the evidence

10th April 2024, 13:01	#3
xsport Posted a thing or two rover 75 club se Join Date: Apr 2011 Location: Leicester Posts: 1,666 Thanks: 358 Thanked 419 Times in 310 Posts	Make sure you get the correct ones in length.as fronts and rears are different and also different for the ZT . There are braided option to choose from as well. I bought a set off ebay , and had to return them. I checked them over before fitting and it never occurred to me to blow through it ! Yes it was blocked . Over crimped i should imagine at the joins. Very annoying and set me back a few days. Buy off a reputable supplier and be fairly confident that A , they will fit in length and B they are a decent manufacturer. Some of these hoses use very thin alloy couplings which can snap very easily,and thats with good due care to fitting and tightening. ... good luck ..