|
||
|
||
|
![]() |
#1 |
Newbie
Rover 75 Saloon Join Date: Dec 2023
Location: Buttikon
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Dear forum members,
I hope you can help me with my problem. Unfortunately the lumbar support can no longer be adjusted on the driver's side electric seat. I have taken the facade off of the side of the seat and can see that it is the plastic peg on the switch pack, which has snapped at its base. I have tried sticking it back in place with some strong adhesive, however this did not work. I am now trying to buy a new switch pack, but I am not sure whether I can just purchase one from Rimmer Brothers and fit it. According to their website, part number: YUB100940PUY is for RHD vehicles. If this part is used on both sides, however, then technically I should also be able to use it for my vehicle. I would greatly appreciate any help or insight on this matter, so that I can resume enjoying this excellent machine! At the moment its like I'm driving in a half-eclined dentist's chair! Regards, Dan |
![]() |
![]() |
![]() |
#2 |
incurable Rover addict
Rover 75 Saloon V6 2.5 1999 - Rover 25 1.4 2002 - Rover 214i cab 1994 - Rover P5b coupe 1968 Join Date: Sep 2017
Location: Bioule. South West of France.
Posts: 1,643
Thanks: 612
Thanked 385 Times in 223 Posts
|
![]() Hello Dan,
Some websites you may search into Allbrit (Germany) Damen & Kroes (Holland) Oliveira & Valentim (Portugal) I tried for you but to no avail for that piece: Switch pack-seat adjust driver. Another solution would be going at a scrapper's but little chance you can find many in Switzerland (like me in France!). I hope that in this club full of knowledge somebody may give you a solution. I can't ascertain you that a RHD mechanism could be fitted in a LHD car. Good luck. Arnaud
__________________
Rover 75 V6 2.5 Auto Connie born 1 July 1999, 24 kOhms resistor, 10 kOhms manual starter, full E85, modified airbox, full derestricted SS exhaust line, power & torque remap -> 202 bhp
|
![]() |
![]() |
![]() |
#3 |
I really should get out more.......
Rover 75 Saloon Join Date: Jul 2011
Location: Gävle
Posts: 2,537
Thanks: 395
Thanked 823 Times in 652 Posts
|
![]() I had a similar issue with that peg but on the passenger's side. I drilled a small hole in the peg and base, heated a stiff piece of wire (TIG welding wire) into the hole and the functionality was restored. I might also have added a drop of Gorilla Glue but as it was some years ago I can't really remember.
Good luck |
![]() |
![]() |
![]() |
#4 |
Avid contributor
Rover 75 CDTi Tourer, CDTi Tourer, Saloon Join Date: Sep 2007
Location: ROME
Posts: 217
Thanks: 60
Thanked 32 Times in 22 Posts
|
![]() Speaking for the 8 way driver switch they are different (see picture attached).
I have two LHD vehicles and a RHD one for spares and they are different. Will have a look for You if someone is selling the LHD one, new or used, otherwise the scrapyard option but I doubt will sell the switch only.. let me see...
__________________
Rover 75 Connoisseur Tourer (Two), Contemporary SE Saloon and ( ![]() ![]() Regular Member |
![]() |
![]() |
![]() |
#5 |
Avid contributor
Rover 75 CDTi Tourer, CDTi Tourer, Saloon Join Date: Sep 2007
Location: ROME
Posts: 217
Thanks: 60
Thanked 32 Times in 22 Posts
|
![]() One for You my friend...
https://ovoko.fr/chercher?q=JLT9058&...NjM2MC4wLjAuMA.. It seems in Lithuania but, no problem I used this site in the past and was Ok
__________________
Rover 75 Connoisseur Tourer (Two), Contemporary SE Saloon and ( ![]() ![]() Regular Member |
![]() |
![]() |
![]() |
#6 |
Newbie
Rover 75 Saloon Join Date: Dec 2023
Location: Buttikon
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Wow, thanks for all of your help!
@vilas66 Thanks for finding me the part. I don't have seat memory on my car at the moment, but if I were to just fit this switch pack, would it then work? Would I be able to save my seating positions? @vitesse Thank you for your reply. If I can't get a replacement switch pack, then I will use your method and just fix it like you said. I remember fixing the fan switch on my 416 si auto, which was just three wires of varying diameter, and I was able to just solder a new bit of wire on! I like these simple fixes, so I will keep hold of it. ![]() @Dorchester2 Thank you as well. I will contact Allbrit and ask them if the parts can be interchanged. I just wanted to know whether there are two types of switch pack, but sending them an email is no problem. I will let you all know about any further developements. Regards, Dan |
![]() |
![]() |
![]() |
#7 |
Avid contributor
Rover 75 CDTi Tourer, CDTi Tourer, Saloon Join Date: Sep 2007
Location: ROME
Posts: 217
Thanks: 60
Thanked 32 Times in 22 Posts
|
![]() I suppose is not only the switch that you need for seat memory....
__________________
Rover 75 Connoisseur Tourer (Two), Contemporary SE Saloon and ( ![]() ![]() Regular Member Last edited by vilas66; 14th March 2024 at 17:45.. |
![]() |
![]() |
![]() |
#8 |
Newbie
Rover 75 Saloon Join Date: Dec 2023
Location: Buttikon
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Hello everyone.
A quick update on the situation. After having done a lot of searching, I wasn't able to find the part I was looking for. I asked RimmerBros whether the part they had for sale would also fit my car, but they replied that it wouldn't. AllBrit seemed to also not have the part I was looking for. So in the end I just purchased an old chair valance complete with switch pack and switches. The only difference is, that this part has the memory buttons on it. I am not sure whether the memory will work (I highly doubt it, you most likely need different motors which can sense the position of the drive shaft etc...), but I quite certain that the switchpack will be able to control the lumbar and base adjustment of the driver's chair. I have taken the 75 on a few trips now and I couldn't be happier with it. It is an absolute joy to drive, its quick (some times a bit too quick...) it gets good fuel economy on longer trips with the cruise control on, and it is soooooo comfortable! Anyway, I'll post again as soon as the part has arrived. ![]() |
![]() |
![]() |
![]() |
|
|