|
||
|
||
|
![]() |
#1 |
Newbie
Rover 75 Tourer Join Date: Apr 2015
Location: Bedford
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Hi guys, have recently acquired a mk2 75 Tourer after my BRM was written off
![]() So far I'm loving the comfort of my 75 1.8t, but have a few questions please. The car is currently on standard suspension and standard wheels, ideally I'd like to lower it a tad and fit some ZT 11 spoke wheels. I know this will change the comfort a little bit, bit aesthetically I believe I will enjoy it more. I was thinking about buying some ZT-T suspension, but having looked there are soo many combinations and I'm afraid I'll get the wrong ones for a straight swap. Cam someone point me in the right direction? The other issue I have is that I keep getting a cam sensor error as a pending fault on my torque app, I've swapped cam sensor and it keeps coming back, it's never a full fault code just a pending one. Any ideas? Not sure if this is the cause of my slightly up and down idle. I've also knabbed the fog lights and loom from a mk2 at the scrappers, but when I went to plug the loom in somewhere it appears the connectors are different? Any advice greatly appreciated! Regards, Gareth |
![]() |
![]() |
![]() |
#2 |
This is my second home
Rover 75 saloon x2, Rover 75 Tourer x2, Rover 220 Coupe Turbo Join Date: Aug 2010
Location: Kirkcaldy, Fife
Posts: 9,038
Thanks: 2,278
Thanked 2,852 Times in 1,718 Posts
|
![]() Welcome to the dark side Gareth.
I sold my brm a couple of years back. Sorry to hear about yours. |
![]() |
![]() |
![]() |
#3 |
Newbie
Rover 75 Tourer Join Date: Apr 2015
Location: Bedford
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Hi guys, have recently acquired a mk2 75 Tourer after my BRM was written off .
So far I'm loving the comfort of my 75 1.8t, but have a few questions please. The car is currently on standard suspension and standard wheels, ideally I'd like to lower it a tad and fit some ZT 11 spoke wheels. I know this will change the comfort a little bit, bit aesthetically I believe I will enjoy it more. I was thinking about buying some ZT-T suspension, but having looked there are soo many combinations and I'm afraid I'll get the wrong ones for a straight swap. Cam someone point me in the right direction? The other issue I have is that I keep getting a cam sensor error as a pending fault on my torque app, I've swapped cam sensor and it keeps coming back, it's never a full fault code just a pending one. Any ideas? Not sure if this is the cause of my slightly up and down idle. I've also knabbed the fog lights and loom from a mk2 at the scrappers, but when I went to plug the loom in somewhere it appears the connectors are different? Any advice greatly appreciated! Regards, Gareth |
![]() |
![]() |
![]() |
#4 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,976
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
![]() Identical threads merged & moved to Technical.
![]() |
![]() |
![]() |
![]() |
#5 |
Newbie
Rover 75 Tourer Join Date: Apr 2015
Location: Bedford
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Thanks suzublu.
|
![]() |
![]() |
![]() |
#6 |
Newbie
Rover 75 Tourer Join Date: Apr 2015
Location: Bedford
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Bump. Anyone at all please?
|
![]() |
![]() |
![]() |
|
|