Change a CD413x or Ivox for a Symphony

Duotone · 23rd March 2008, 10:42

Here is a picture of the ISO connectors to the Symphony..
You will see that Blue/Orange wire is in pin 2.
and the Blue/Purple is in pin 3.
[I have used plain Orange and plain Purple wires for display purpose]
Also you will notice that pin 1 is empty, if there is a wire in pin 1 it must be removed, as this connection is for the telephone mute.
If it is left connected you may get a repeated message on the display of the Symphony saying "TELEPHONE MUTE"..

Dave T

Simon · 23rd March 2008, 10:50

Above post copied into your How-To in the ICE How To Forum.

Duotone · 23rd March 2008, 10:59

Quote:

Originally Posted by Simon

Above post copied into your How-To in the ICE How To Forum.

Thanks Simon..

I think that covers the "How To". Unless anyone has any further questiions..

Dave T

Kandyman · 23rd March 2008, 16:02

Cheers Guys

STUBIE · 5th April 2008, 20:12

Quote:

Originally Posted by Duotone

Here is a picture of the ISO connectors to the Symphony..
You will see that Blue/Orange wire is in pin 2.
and the Blue/Purple is in pin 3.
[I have used plain Orange and plain Purple wires for display purpose]
Also you will notice that pin 1 is empty, if there is a wire in pin 1 it must be removed, as this connection is for the telephone mute.
If it is left connected you may get a repeated message on the display of the Symphony saying "TELEPHONE MUTE"..

Dave T

Dave how did you get the wires out to refit into pin 2 and 3 of the the grey ISO connector?

Duotone · 5th April 2008, 20:53

Quote:

Originally Posted by STUBIE

Dave how did you get the wires out to refit into pin 2 and 3 of the the grey ISO connector?

The two wires blue/orange and blue/purple will have to be cut as the pins in the green mini ISO are smaller than the ones in the grey ISO..

In the grey ISO plug there are usually wires connected to pins 1,2,3. these are not used in the Symphony install, 1 is cut [not needed as its phone mute]
2 and 3 should be cut leaving a shot length of wire attached to the pins.
Then the short bits of wire are joined to the blue/orange and the blue/purple.

If you have no pins in 2 and 3 you will have to purchase them.
I will have to look up where you can buy them.

Dave T

Duotone · 5th April 2008, 21:06

This is where you can buy the pins..

http://www.nexxia.co.uk/Car_Stereo_f...Connectors.htm

Dave T

STUBIE · 5th April 2008, 21:39

Thanks Dave

Stubs

23rd March 2008, 10:42	#1
Duotone This is my second home 75 Join Date: Nov 2006 Location: Leeds Posts: 8,432 Thanks: 176 Thanked 907 Times in 716 Posts	Change a CD413x or Ivox for a Symphony Here is a picture of the ISO connectors to the Symphony.. You will see that Blue/Orange wire is in pin 2. and the Blue/Purple is in pin 3. [I have used plain Orange and plain Purple wires for display purpose] Also you will notice that pin 1 is empty, if there is a wire in pin 1 it must be removed, as this connection is for the telephone mute. If it is left connected you may get a repeated message on the display of the Symphony saying "TELEPHONE MUTE".. Dave T

23rd March 2008, 10:50	#2
Simon Banned - Join Date: Nov 2006 Location: - Posts: 10,318 Thanks: 0 Thanked 4 Times in 3 Posts	Above post copied into your How-To in the ICE How To Forum.

23rd March 2008, 16:02	#4
Kandyman Banned ROVER 75 2.5 V6 Connoisseur SE Limousine 2004 Join Date: Oct 2006 Location: Welling Posts: 10,995 Thanks: 0 Thanked 2 Times in 2 Posts	Cheers Guys

5th April 2008, 21:06	#7
Duotone This is my second home 75 Join Date: Nov 2006 Location: Leeds Posts: 8,432 Thanks: 176 Thanked 907 Times in 716 Posts	This is where you can buy the pins.. http://www.nexxia.co.uk/Car_Stereo_f...Connectors.htm Dave T

5th April 2008, 21:39	#8
STUBIE This is my second home Back in a Rover Join Date: Nov 2006 Location: Peterborough Posts: 4,926 Thanks: 131 Thanked 357 Times in 261 Posts	Thanks Dave Stubs