CR213x with error message NO SRC

Aga · 25th March 2008, 10:38

HI y'all
Got into my beast earlier in the week & went to listen to my CD (it is a boot loading version). Would not work. Returned an error message on the screen readout as NO SRC.
Does this mean that I have a loose connection or something more serious?

Simon · 25th March 2008, 14:19

Could well be a loose connection somewhere. Check all obvious connections first then retry. Maybe also a lens-cleaning kit wouldn't go amiss to ensure no dirt inside the CD changer. If that doesn't work you might have to have a more in-depth search for loose connections (such as the rear of the headunit and any interconnections along the route towards the boot).

If all else fails do you have access to another CD Changer to try?

Aga · 26th March 2008, 21:10

Cheers Simon.
I'll check the connections now that I am back from vacation.
However, has anyone seen this error message before?

Aga · 30th March 2008, 17:25

Obviously, I am the first to experience this error message!
Never mind - it was worth a try!

holmroad · 7th April 2017, 19:06

I have 'No SRC' display from my VDO CD413 on MG ZT 190 when selecting cd mode (after radio mode which is working fine, as is tape mode) from bottom (down) key on dash, after having to reposition whole black plastic front slider plate on rear 6 disc changer unit after it had come off!
Cannot open cassette from small grey release button either, also no noises from rear unit which I normally get when unit operating normally after inserting cassette - so unable to remove cassette which may even be jammed?
Checked 5A fuse not blown either!

HELP!!!!!

Aga · 19th April 2017, 16:28

I ended up replacing the unit with one from Halfords!

25th March 2008, 10:38	#1
Aga Gets stuck in MG ZT+ CDTi Black Pearl Join Date: Dec 2006 Location: Portchester (nr Portsmouth) Posts: 534 Thanks: 10 Thanked 0 Times in 0 Posts	CR213x with error message NO SRC HI y'all Got into my beast earlier in the week & went to listen to my CD (it is a boot loading version). Would not work. Returned an error message on the screen readout as NO SRC. Does this mean that I have a loose connection or something more serious?

7th April 2017, 19:06	#5
holmroad Newbie MG ZT 190 Join Date: May 2012 Location: Gainsborough Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	No SRC display I have 'No SRC' display from my VDO CD413 on MG ZT 190 when selecting cd mode (after radio mode which is working fine, as is tape mode) from bottom (down) key on dash, after having to reposition whole black plastic front slider plate on rear 6 disc changer unit after it had come off! Cannot open cassette from small grey release button either, also no noises from rear unit which I normally get when unit operating normally after inserting cassette - so unable to remove cassette which may even be jammed? Checked 5A fuse not blown either! HELP!!!!!

19th April 2017, 16:28	#6
Aga Gets stuck in MG ZT+ CDTi Black Pearl Join Date: Dec 2006 Location: Portchester (nr Portsmouth) Posts: 534 Thanks: 10 Thanked 0 Times in 0 Posts	I ended up replacing the unit with one from Halfords! __________________ Welshman in exile on South Coast

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

25th March 2008, 14:19	#2
Simon Banned - Join Date: Nov 2006 Location: - Posts: 10,318 Thanks: 0 Thanked 4 Times in 3 Posts	Could well be a loose connection somewhere. Check all obvious connections first then retry. Maybe also a lens-cleaning kit wouldn't go amiss to ensure no dirt inside the CD changer. If that doesn't work you might have to have a more in-depth search for loose connections (such as the rear of the headunit and any interconnections along the route towards the boot). If all else fails do you have access to another CD Changer to try?

26th March 2008, 21:10	#3
Aga Gets stuck in MG ZT+ CDTi Black Pearl Join Date: Dec 2006 Location: Portchester (nr Portsmouth) Posts: 534 Thanks: 10 Thanked 0 Times in 0 Posts	Cheers Simon. I'll check the connections now that I am back from vacation. However, has anyone seen this error message before?

30th March 2008, 17:25	#4
Aga Gets stuck in MG ZT+ CDTi Black Pearl Join Date: Dec 2006 Location: Portchester (nr Portsmouth) Posts: 534 Thanks: 10 Thanked 0 Times in 0 Posts	Obviously, I am the first to experience this error message! Never mind - it was worth a try!