|
||
|
||
|
![]() |
#31 |
I really should get out more.......
MG ZT-T 260 Join Date: Feb 2016
Location: Witney
Posts: 2,504
Thanks: 6
Thanked 910 Times in 571 Posts
|
![]() Just a thought is the cooling fan running all the time?
The heating system on a 260 is quite complicated, the valve is in front of the windscreen on the left hand side and can cause problems. Do get over to the 260 Forum as there is a lot of knowledge over there. |
![]() |
![]() |
![]() |
#32 | |
Posted a thing or two
MG ZT Join Date: Dec 2009
Location: Hatfield
Posts: 1,378
Thanks: 240
Thanked 144 Times in 118 Posts
|
![]() Quote:
Kev Last edited by torque2me; 20th March 2024 at 11:25.. Reason: missing text |
|
![]() |
![]() |
![]() |
#33 |
Avid contributor
MG ZT Join Date: Sep 2018
Location: Tamworth
Posts: 210
Thanks: 0
Thanked 34 Times in 17 Posts
|
![]() Thanks lads, the heater valve is where? When i find it what do i look for?
|
![]() |
![]() |
![]() |
#34 | |
I really should get out more.......
MG ZT-T 260 Join Date: Feb 2016
Location: Witney
Posts: 2,504
Thanks: 6
Thanked 910 Times in 571 Posts
|
![]() Quote:
Check to see if the actuator is moving when you select different heat settings and it has 3 pipes attached to it. When you go from ''low'' with the engine hot the pipe that gets hot should change as you increase the temp to ''high''. It is a bypass valve so hot water is always passing through it and selecting more heat allows some or all of the hot water to enter the heater matrix and as it gets up to the desired heat it goes back into bypassing the heater valve until more heat is needed. The heating in mine was hit and miss and fitting one of these fixed and returned it to full health https://www.dmgrs.co.uk/collections/...alve-jge000020 |
|
![]() |
![]() |
![]() |
#35 | |
Avid contributor
MG ZT Join Date: Sep 2018
Location: Tamworth
Posts: 210
Thanks: 0
Thanked 34 Times in 17 Posts
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
|
|