|
||
|
20th May 2010, 15:53 | #1 |
I really should get out more.......
MG ZT CDTI Join Date: Sep 2007
Location: 17500 REAUX, CHARENTE-MARITIME
Posts: 2,749
Thanks: 2
Thanked 133 Times in 90 Posts
|
IPK question
Following on from a different thread, I am a little confused with regards to which type of IPK I have fitted.
The direction indicator stalk has the push end which brings up info in the top display, but if I have a bulb failure etc I get no extra info. Pics of the IPK in question: Mick |
20th May 2010, 15:59 | #2 |
Moderator
MG-ZTT Join Date: Mar 2007
Location: Ware, Herts
Posts: 19,798
Thanks: 161
Thanked 1,249 Times in 1,036 Posts
|
Looks like a message centre to me Mick....
__________________
David Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics] |
20th May 2010, 15:59 | #3 |
This is my second home
MG ZT-T 190 Monogram Typhoon Join Date: Jan 2009
Location: Oxfordshire
Posts: 4,707
Thanks: 328
Thanked 557 Times in 443 Posts
|
I'm pretty sure the bulb failure info is displayed a few seconds after you turn off the ignition. Nothing will show if all bulbs are ok.
|
20th May 2010, 16:48 | #4 |
ZT, 75 & 260 Rescue
2002 MG ZT 260 (007), 2003 MG ZT-T 260 SE, 2004 75 CDTI Tourer Join Date: Feb 2008
Location: East Brent
Posts: 2,447
Thanks: 88
Thanked 50 Times in 29 Posts
|
Depending on what bulb has failed, you may need to turn on the lights before the warning shows on the IPK.
|
20th May 2010, 16:51 | #5 |
*
Rover 75 FaceLift Tourer CDTi 170BHP Auto ConnSE 2005 Model Starlight Silver Join Date: Nov 2006
Location: Abergele
Posts: 28,735
Thanks: 0
Thanked 6 Times in 5 Posts
|
|
20th May 2010, 16:51 | #6 |
I really should get out more.......
BMW I3 Join Date: Nov 2006
Location: South East London
Posts: 2,224
Thanks: 31
Thanked 77 Times in 61 Posts
|
When one of my indicator bulbs went, I got a BIG orange warning on the message IPK whilst I was driving, when you turned off the ignition, it showed w
__________________
Regards Tony Membership No 135 |
20th May 2010, 17:04 | #7 | |
This is my second home
lovely little ford focus. Join Date: Jul 2009
Location: East Dulwich
Posts: 7,877
Thanks: 2
Thanked 82 Times in 68 Posts
|
Quote:
whip a bulb out and turn on ignit=ion see if it shows pic of car and highlighting the bulb area ..you should get the pic of the car up showing what the problem is ,it lights for around 10 seconds before reverting back to the icon of bulb failure ..
__________________
[ I'm really confused. -I keep dreaming I'm an insomniac Last edited by chrissyboy; 20th May 2010 at 17:13.. |
|
20th May 2010, 17:21 | #8 |
Posted a thing or two
BMW 4 Series Join Date: Nov 2008
Location: Rochester, Kent
Posts: 1,975
Thanks: 29
Thanked 37 Times in 28 Posts
|
Just to clarify :
1) When the car is running and a bulb is not working, it will just show a yellow bulb in the top left corner of the screen. 2) When the ignition is on but the car ISN'T running, it will show a car diagram indicating which bulb has gone.
__________________
Steve 2004 MG ZT+ CDTi 160 (sadly now gone!) 2015 BMW 435d GranCoupe XDrive |
20th May 2010, 18:31 | #9 |
Gets stuck in
Ford Kuga Join Date: Mar 2010
Location: Tatworth, Somerset
Posts: 734
Thanks: 1
Thanked 2 Times in 2 Posts
|
I've got the same as that except I've never seen the fuel consumption start with a 5!!!
|
20th May 2010, 19:38 | #10 |
I really should get out more.......
MG ZT CDTI Join Date: Sep 2007
Location: 17500 REAUX, CHARENTE-MARITIME
Posts: 2,749
Thanks: 2
Thanked 133 Times in 90 Posts
|
OK folks.
Humble pie time. I'm as thick as a brick. It must be the full message centre type. Not sure I agree with all the operational comments, but if I disconnect the main beam lead, I get no warning until I put main beams on. At this point in time I get the bulb failure symbol but no further information. After this it gets a little more complicated depending on whether or not I turn the lights off before the ignition, but I do get a "Main Beam Bulb" failure message. Obviously I have never been looking at the display with the correct considerations before, because I didn't know precisely what it did (even though I have read the handbook several times!). Thanks for all the input guys. I stand corrected. Mick |
|
|