Under Bonnet Fuel Pumps Diesel CDT/i For Sale (In stock again)

Jules · 4th February 2010, 12:58

[/B]

We have a small qty of these OEM Under Bonnet Pumps. Part No WQB100482

Sometimes known as:
The Secondary Pump
Pump-fuel remote mounting
Inline Pump
UB Pump

Price £135 + £4 PP
Payment Details
All major Cards accepted, cheque by post, Bank Transfer using IBAN BIC codes, or Paypal to [email protected]
International Buyers welcome
Tel 01492 535020
Mob 07831 457011--

Jules · 12th February 2010, 19:59

Also coming soon are the In-tank pumps for a very reasonable price.
Just the pump & not the whole Plastic paraphernalia which usually isn't required.

doublekite · 14th February 2010, 20:43

Jules
Are these easy to fit by a novice? In have to keep tapping the wifes pump with a spanner to get the car to start, but I'm no good at mechanics!

Jules · 14th February 2010, 20:59

Depends how spanner friendly you are!!
Wear Nitrile gloves (fuel proof)

1 Disconnect Battery (13mm spanner)
2. Remove Battery 10mm and long extension bar
3. Remove Battery tray (Qty 3 or 4 x 13mm bolts
4. Unplug pump & insert & twist a small screw driver to release fuel pipe clip
5. Undo pump clamp 8mm bolt
6 Slide subtray forwards 2 or 3 inches to reveal the bottom fuel inlet hose
7. Unclip fuel hose clip in similar manner
8 Pull & twist the Pump upwards

Re assembly is reverse etc.

Switch on ignition wait for 30 seconds to self prime the fuel through.
Swtich off.
(Power is removed after 30 secs if engine isn't started)
Switch on again
Give it another 10 seconds before starting up.

If engine stalls after a few seconds, there's still air in the system.
Simply give it another 30 seconds with ignition on to purge the system.

Ready to test drive now

Jules · 17th February 2010, 11:18

Hit something new every day, I've not seen this part yet .
Where is it fitted? (maybe overseas models)

Anyone know anything about it :
Item 9............... TANK ASSEMBLY FUEL EXPANSION

MadRus · 24th February 2010, 21:04

Thanks a lot mate.

Jules · 1st March 2010, 23:12

Anybody any thoughts about the expansion unit yet?

(see post no 5)

Kedaha · 3rd March 2010, 00:33

I have an idea of where it *might* be, will take a peek tomorrow when I get under her to fix the undertray!

Departed · 3rd March 2010, 18:21

Not come across one on a 75, but never really looked.

I'd expect it to be tucked up somewhere near the fuel filler, behind the wing. That's where I've seen them on other cars.

Jules · 25th March 2010, 08:14

Quote:

Originally Posted by Kedaha

I have an idea of where it *might* be, will take a peek tomorrow when I get under her to fix the undertray!

Did you find it ?
Still a mystery to us. See post number 5

4th February 2010, 12:58	#1
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Under Bonnet Fuel Pumps Diesel CDT/i For Sale (In stock again) [/B] We have a small qty of these OEM Under Bonnet Pumps. Part No WQB100482 Sometimes known as: The Secondary Pump Pump-fuel remote mounting Inline Pump UB Pump Price £135 + £4 PP Payment Details All major Cards accepted, cheque by post, Bank Transfer using IBAN BIC codes, or Paypal to [email protected] International Buyers welcome Tel 01492 535020 Mob 07831 457011-- __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block Last edited by Jules; 11th April 2010 at 21:11..

12th February 2010, 19:59	#2
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Also coming soon are the In-tank pumps for a very reasonable price. Just the pump & not the whole Plastic paraphernalia which usually isn't required. __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

14th February 2010, 20:59	#4
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Depends how spanner friendly you are!! Wear Nitrile gloves (fuel proof) 1 Disconnect Battery (13mm spanner) 2. Remove Battery 10mm and long extension bar 3. Remove Battery tray (Qty 3 or 4 x 13mm bolts 4. Unplug pump & insert & twist a small screw driver to release fuel pipe clip 5. Undo pump clamp 8mm bolt 6 Slide subtray forwards 2 or 3 inches to reveal the bottom fuel inlet hose 7. Unclip fuel hose clip in similar manner 8 Pull & twist the Pump upwards Re assembly is reverse etc. Switch on ignition wait for 30 seconds to self prime the fuel through. Swtich off. (Power is removed after 30 secs if engine isn't started) Switch on again Give it another 10 seconds before starting up. If engine stalls after a few seconds, there's still air in the system. Simply give it another 30 seconds with ignition on to purge the system. Ready to test drive now __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

17th February 2010, 11:18	#5
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Fuel Tank expansion unit Hit something new every day, I've not seen this part yet . Where is it fitted? (maybe overseas models) Anyone know anything about it : Item 9............... TANK ASSEMBLY FUEL EXPANSION __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

1st March 2010, 23:12	#7
Jules This is my second home ZT 260 SE Twilight and 10 other 75 ZT's :O Join Date: Jan 2007 Location: Conwy NORTH WALES Posts: 11,094 Thanks: 512 Thanked 1,116 Times in 763 Posts	Anybody any thoughts about the expansion unit yet? (see post no 5) __________________ [SIGPIC][/SIGPIC] Newbies do now!! 1. Plenum drains..all 3 or 4 year dependent 2. Cooling fan..All speeds functioning 3. Bonnet cable divider block

14th February 2010, 20:43	#3
doublekite My other car is a bus 2005 Jaguar S Type 2.7D automatic and 2007 Jaguar S Type XS 2.7D automatic Join Date: Dec 2006 Location: Norwich Posts: 430 Thanks: 0 Thanked 0 Times in 0 Posts	Jules Are these easy to fit by a novice? In have to keep tapping the wifes pump with a spanner to get the car to start, but I'm no good at mechanics!

24th February 2010, 21:04	#6
MadRus Regular poster Rover 75 Connoisseur CDT auto Join Date: Aug 2009 Location: Welwyn Garden City Posts: 63 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks a lot mate.

3rd March 2010, 00:33	#8
Kedaha Gets stuck in MG ZT 190 SE Join Date: Jun 2009 Location: Dublin Posts: 500 Thanks: 3 Thanked 6 Times in 6 Posts	I have an idea of where it might be, will take a peek tomorrow when I get under her to fix the undertray!

3rd March 2010, 18:21	#9
Departed Retired -- Join Date: Jan 2007 Location: -- Posts: 3,785 Thanks: 0 Thanked 4 Times in 4 Posts	Not come across one on a 75, but never really looked. I'd expect it to be tucked up somewhere near the fuel filler, behind the wing. That's where I've seen them on other cars.