Can you guess what I'm doing....

Blackwatch · 9th September 2013, 16:52

Ok folks I am starting a new Project.....I love them but the wife hates it when I start them as the last one I started took me 6 months and involved totally refurbishing and modifying a CM Stacker 830 PC case for a new water cooled PC build.....and I am already planning my next one lol.

So can you guess what the first stage is going to be?

The first correct answer wins a prize

steerzpyke · 9th September 2013, 17:14

She is sure to be thrilled with the in car ironing board you are fitting

Blackwatch · 9th September 2013, 17:19

shhhh you give her ideas

coolcat · 9th September 2013, 17:35

Looks like a nice piece of mdf

I'm guessing your going to be building a sub enclosure or maybe a some other sort of speaker mounting or boot build

Blackwatch · 9th September 2013, 17:51

Congratulations let me raid the prize bin..... send me a PM with your address and I will send you a prize as I am a man of my word.

Actually it is Baltic Birch as it has better sound properties than MDF. A little more expensive and slightly harder to tool but worth it.

The main aim is to make a solid 12mm think Fibre glass mould for the sub enclosure and then Bond this to the front of it so in effect it will blank off the entire left side of the car.

I will then carpet it and also mount the sub amp and Power cap into it.

Pictures will speak a 1000 words and if the mods don't mind I would like to start an official project log with pics etc.

coolcat · 9th September 2013, 17:53

Quote:

Originally Posted by Blackwatch

Congratulations let me raid the prize bin..... send me a PM with your address and I will send you a prize as I am a man of my word.

Actually it is Baltic Birch as it has better sound properties than MDF. A little more expensive and slightly harder to tool but worth it.

The main aim is to make a solid 12mm think Fibre glass mould for the sub enclosure and then Bond this to the front of it so in effect it will blank off the entire left side of the car.

I will then carpet it and also mount the sub amp and Power cap into it.

Pictures will speak a 1000 words and if the mods don't mind I would like to start an official project log with pics etc.

Looking forward to seeing your progress

Blackwatch · 9th September 2013, 18:01

I'll start a new topic on Wednesday When I make a start on it.

For people that like reading project logs heres one of mine from my last PC case build.

http://www.specialtechforums.co.uk/s...roject-FireFLy

tareim · 9th September 2013, 19:22

Quote:

Originally Posted by Blackwatch

I'll start a new topic on Wednesday When I make a start on it.

For people that like reading project logs heres one of mine from my last PC case build.

http://www.specialtechforums.co.uk/s...roject-FireFLy

I'm going out on a limb here and saying that you use nVidia graphics cards? not sure where I'm getting the hint from though haha

9th September 2013, 16:52	#1
Blackwatch Avid contributor MG ZT 190 Join Date: Aug 2013 Location: Huddersfield Posts: 150 Thanks: 9 Thanked 4 Times in 4 Posts	Can you guess what I'm doing.... Ok folks I am starting a new Project.....I love them but the wife hates it when I start them as the last one I started took me 6 months and involved totally refurbishing and modifying a CM Stacker 830 PC case for a new water cooled PC build.....and I am already planning my next one lol. So can you guess what the first stage is going to be? The first correct answer wins a prize __________________ [SIGPIC][/SIGPIC] www.warriorknightsgaming.com Last edited by Blackwatch; 9th September 2013 at 16:55..

9th September 2013, 17:14	#2
steerzpyke Avid contributor Rover 75 Auto cdti Join Date: May 2008 Location: North Kent Posts: 107 Thanks: 13 Thanked 5 Times in 5 Posts	She is sure to be thrilled with the in car ironing board you are fitting __________________ [SIGPIC][/SIGPIC]The craic was good in Cricklewood

9th September 2013, 17:19	#3
Blackwatch Avid contributor MG ZT 190 Join Date: Aug 2013 Location: Huddersfield Posts: 150 Thanks: 9 Thanked 4 Times in 4 Posts	shhhh you give her ideas __________________ [SIGPIC][/SIGPIC] www.warriorknightsgaming.com

9th September 2013, 17:35	#4
coolcat This is my second home Audi Q3 TDI S-Line Quattro Join Date: Jul 2007 Location: Clacton On Sea/On the boat somewhere Posts: 51,211 Thanks: 9,890 Thanked 12,235 Times in 8,232 Posts	Looks like a nice piece of mdf I'm guessing your going to be building a sub enclosure or maybe a some other sort of speaker mounting or boot build __________________ Jeff.

9th September 2013, 17:51	#5
Blackwatch Avid contributor MG ZT 190 Join Date: Aug 2013 Location: Huddersfield Posts: 150 Thanks: 9 Thanked 4 Times in 4 Posts	Congratulations let me raid the prize bin..... send me a PM with your address and I will send you a prize as I am a man of my word. Actually it is Baltic Birch as it has better sound properties than MDF. A little more expensive and slightly harder to tool but worth it. The main aim is to make a solid 12mm think Fibre glass mould for the sub enclosure and then Bond this to the front of it so in effect it will blank off the entire left side of the car. I will then carpet it and also mount the sub amp and Power cap into it. Pictures will speak a 1000 words and if the mods don't mind I would like to start an official project log with pics etc. __________________ [SIGPIC][/SIGPIC] www.warriorknightsgaming.com

9th September 2013, 18:01	#7
Blackwatch Avid contributor MG ZT 190 Join Date: Aug 2013 Location: Huddersfield Posts: 150 Thanks: 9 Thanked 4 Times in 4 Posts	I'll start a new topic on Wednesday When I make a start on it. For people that like reading project logs heres one of mine from my last PC case build. http://www.specialtechforums.co.uk/s...roject-FireFLy __________________ [SIGPIC][/SIGPIC] www.warriorknightsgaming.com